Microtech 3rd gen plug and play
#1
Rotary Enthusiast
Thread Starter
Microtech 3rd gen plug and play
Guys,
Just had the news that a Microtech Plug and play for a 3rd gen is not far away. a mate has a trail version in his car and it is working very very well,
from what i was told it also CONTROLS THE OMP!!!
It plugs straight into your factory loom and all the realays under the inlet manafold can be removed!
At this stage the computers should be about 4 weeks away, and am not sure of a finished price yet but going on what my mate payed for the demo one they will be AROUND the $800us mark (not a conformed price)
they are based on a LTX12 board and using the extra outputs to control the OMP and other functions as well.
Dale
Just had the news that a Microtech Plug and play for a 3rd gen is not far away. a mate has a trail version in his car and it is working very very well,
from what i was told it also CONTROLS THE OMP!!!
It plugs straight into your factory loom and all the realays under the inlet manafold can be removed!
At this stage the computers should be about 4 weeks away, and am not sure of a finished price yet but going on what my mate payed for the demo one they will be AROUND the $800us mark (not a conformed price)
they are based on a LTX12 board and using the extra outputs to control the OMP and other functions as well.
Dale
#3
Rotary Enthusiast
Thread Starter
Yes there number is +612 98085233
i spoke to them yesterday and they are looking at about a month release date for the computer.
What do you need to know?? ask away and ill try and answer the questions as best i can.
Dale
i spoke to them yesterday and they are looking at about a month release date for the computer.
What do you need to know?? ask away and ill try and answer the questions as best i can.
Dale
#4
Full Member
Join Date: Jul 2002
Location: ASI Racing in Ft Lauderdale 954-566-2472
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
thank you ,I really just needed a contact number and have had a hard time contacting them direct and you seemed very knowledgable of the source.I own an FD shop in Florida(ASIracing)and am greatly anticipating the release of a plug and play.Maybe you can tell me if you anticipate the use of hand held commander or if it is laptop only?Once again, thanks for your help!
Chad
Chad
#5
Rotary Enthusiast
Thread Starter
Call the above number and speek to Russell or Dom, i spoke to them yesterday and they are not ready for sale yet and we expecting about 3 weeks away.
yes they will be tunable with the handset or the laptop as are all the microtech computers. to hook into the laptop you will require a dongle and for the handset it plugs straight in.
Dale
yes they will be tunable with the handset or the laptop as are all the microtech computers. to hook into the laptop you will require a dongle and for the handset it plugs straight in.
Dale
#7
Senior Member
Join Date: Apr 2001
Location: Boston, MA, USA
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
It plugs straight into your factory loom and all the realays under the inlet manafold can be removed!
What does this mean - which relays? Do you mean the solenoid rack? I didn't think there were relays under intake manifold.
If you mean the solenoids - then does that mean the ECU only works with non-sequential and single-turbo modes?
What does this mean - which relays? Do you mean the solenoid rack? I didn't think there were relays under intake manifold.
If you mean the solenoids - then does that mean the ECU only works with non-sequential and single-turbo modes?
Trending Topics
#8
Rotary Enthusiast
Thread Starter
Yes it will come with a base map to allow you to start the car and drive it like factory,
The soloniod rack can stay for sequential turbos, every request i have had so far the question has been asked if the soloniod rack can be removed.
The soloniod rack can stay for sequential turbos, every request i have had so far the question has been asked if the soloniod rack can be removed.
Thread
Thread Starter
Forum
Replies
Last Post