Buckey's Pro-Am Build: '87 Mazda RX7 TurboII
#177
thanks man! i posted some pics of your FD from the meet 2 weeks ago on vegasrotary. we're going to go back to the drift spot tomorrow night, if you want to go watch, drive, or get food or something before hand. feel free to text/call me. i got a new phone finally. lol
702 541 5155- buckey.
thanks again oun!
702 541 5155- buckey.
thanks again oun!
#178
Full Member
well i just sat here and read you full thread... ya... about 1.5 hours of reading everything! lol
first of all, ur car is sick!!!! ZIPTIES + TURBOS = DRIF-TASTIC! haha secondly, you have deffinately motivated me to stick with my fc. and that i need to get out of montana. this state has nothing for drifting. besides me and my 6 buddies (zookr3w) there really aint **** goin on out here. i envy everything you guys have out there, its just soooo inspiring readin this thread! classy/great job. ur **** is solid man! (haha that sounds bad)
first of all, ur car is sick!!!! ZIPTIES + TURBOS = DRIF-TASTIC! haha secondly, you have deffinately motivated me to stick with my fc. and that i need to get out of montana. this state has nothing for drifting. besides me and my 6 buddies (zookr3w) there really aint **** goin on out here. i envy everything you guys have out there, its just soooo inspiring readin this thread! classy/great job. ur **** is solid man! (haha that sounds bad)
#179
well i just sat here and read you full thread... ya... about 1.5 hours of reading everything! lol
first of all, ur car is sick!!!! ZIPTIES + TURBOS = DRIF-TASTIC! haha secondly, you have deffinately motivated me to stick with my fc. and that i need to get out of montana. this state has nothing for drifting. besides me and my 6 buddies (zookr3w) there really aint **** goin on out here. i envy everything you guys have out there, its just soooo inspiring readin this thread! classy/great job. ur **** is solid man! (haha that sounds bad)
first of all, ur car is sick!!!! ZIPTIES + TURBOS = DRIF-TASTIC! haha secondly, you have deffinately motivated me to stick with my fc. and that i need to get out of montana. this state has nothing for drifting. besides me and my 6 buddies (zookr3w) there really aint **** goin on out here. i envy everything you guys have out there, its just soooo inspiring readin this thread! classy/great job. ur **** is solid man! (haha that sounds bad)
thanks for your post! it means alot, and is encouraging to keep going when others benefit by this! i appreciate the kind words!
i have justin to thank for me getting an FC, so i'm with you on the whole "inspired to keep it" thing.
ever since D1 '07 i've been in the rotary game. but didnt really get too involved in building my first fc till late '08. blew up some motors, and got a deal i couldnt pass up for my old car, and now i have this one. lol.
stick with it, you'll get where you wanna go! it's all about your dedication.
#180
Full Member
thanks for your post! it means alot, and is encouraging to keep going when others benefit by this! i appreciate the kind words!
i have justin to thank for me getting an FC, so i'm with you on the whole "inspired to keep it" thing.
ever since D1 '07 i've been in the rotary game. but didnt really get too involved in building my first fc till late '08. blew up some motors, and got a deal i couldnt pass up for my old car, and now i have this one. lol.
stick with it, you'll get where you wanna go! it's all about your dedication.
i have justin to thank for me getting an FC, so i'm with you on the whole "inspired to keep it" thing.
ever since D1 '07 i've been in the rotary game. but didnt really get too involved in building my first fc till late '08. blew up some motors, and got a deal i couldnt pass up for my old car, and now i have this one. lol.
stick with it, you'll get where you wanna go! it's all about your dedication.
oh and by the way... the flake on everything is classy! made me laugh everytime i saw more added! hahaha and sorry for the long *** message :p
#183
thats awesome! thanks! i love that pic too!
more pics to come shortly!! i have some street driving vids i may post. ive been trying to get used to the car as best i can for the 2nd pro-am stop. hopefully i can keep up the points, and podium again to make the FD event at the end of the year.
more pics to come shortly!! i have some street driving vids i may post. ive been trying to get used to the car as best i can for the 2nd pro-am stop. hopefully i can keep up the points, and podium again to make the FD event at the end of the year.
#184
Updated Pics from the last month!
finally got around to uploading everything.
After we got it running, we had to work out some bugs, and when the injectors came in, i got to it.
Sent out my 550cc injectors to RC to get rebuilt. they came back looking fresh!
Fresh LIM and turbo manifold gaskets from area77!
Doing the swappings.
Braided AN line without the AN fittings. semi ballin... not really lol.
Turbo back on
Forrest's bomb stitch welds, and my sketchy coil-overs with the stock mounts all rigged up haha if only it had camber plates, it would be on the grounddd!!!!
finally got around to uploading everything.
After we got it running, we had to work out some bugs, and when the injectors came in, i got to it.
Sent out my 550cc injectors to RC to get rebuilt. they came back looking fresh!
Fresh LIM and turbo manifold gaskets from area77!
Doing the swappings.
Braided AN line without the AN fittings. semi ballin... not really lol.
Turbo back on
Forrest's bomb stitch welds, and my sketchy coil-overs with the stock mounts all rigged up haha if only it had camber plates, it would be on the grounddd!!!!
#185
Garage Tune shield
Walked outside to go driving, and noticed there was a pink little pony sticker on my car... pretty strange, but i kept it? lol
Forrest **** spindles
During the swap i found the reason why my camber was so far off thankfully it was only the lower ball joint. the kid i bought the car from wrecked it into 2 curbs when before i got it. both times i got to see it, and really it wasnt too bad, but here are the pics. im really surprised the they bent. (seriously the car is so much more consistent during transitioning now)
Look at the actual metal part, and not the endlink/balljoint)
Spindles installed. pic of the angle (note thats not the full amount, due to the steering wheel not being held at lock... thats as far as it would stay on its own...)
(bricks lol sketchy jackings!)
#189
thanks! i flap disc'd the welds smooth, and painted them with rattle cans, and that rattle can mazora clear paint. lol i forgot which race was for the wheel bearing (didnt pay attention and truly didnt care knowing the brakes would cover it) and just taped it off fast...
the ackerman is off alot, and i notice it on low speed stuff (like parking, and backing up) it tends to "push" more. but i like it. not spinning out is pretty cool, makes me more confident to get nutsss! i might see if he'll re-cut them, because theres alot of angle left to be had yet.
the ackerman is off alot, and i notice it on low speed stuff (like parking, and backing up) it tends to "push" more. but i like it. not spinning out is pretty cool, makes me more confident to get nutsss! i might see if he'll re-cut them, because theres alot of angle left to be had yet.
#194
well guys, i got 1st place, and got alot of video. what a night. i've come to realize cheap champagne burns your eyes like crazy!
FC's FTW! my quarter panel is officially done, i ripped out my taillight following forrest on the practice night.
time to get ready for ASB!!!
http://www.youtube.com/watch?v=oZTHLBJ6zTE
FC's FTW! my quarter panel is officially done, i ripped out my taillight following forrest on the practice night.
time to get ready for ASB!!!
http://www.youtube.com/watch?v=oZTHLBJ6zTE
#196
Made it to the VD 19 practice event on friday, drove hard all night, and came back saturday for practice, and qualifying... then it happened..
with an hour and ten mins left in the last practice session before the drivers meeting for qualifying, my exedy clutch decided to die off. (all day, and the last few runs on friday i noticed clutch hydraulic issues/noises, or so i thought.)
come to find out not only was my clutch in pieces, but my throw-out bearing was completely seized.
yosh took this pic of james with garagetune working his *** off under my car (keep in mind i was running,and just came in off course and we got to work) everything was still super hot.. in the rush of the madness, i think this may be the only photo taken.
Paul (eakine) was posted on the jack, ray (mickeymouse/whitecomet) was on the other side getting the starter off, kevin phil & james were banging out the driveshaft/downpipe. there were so many people helping... idk where i was in this pic lol.
with an hour and ten mins left in the last practice session before the drivers meeting for qualifying, my exedy clutch decided to die off. (all day, and the last few runs on friday i noticed clutch hydraulic issues/noises, or so i thought.)
come to find out not only was my clutch in pieces, but my throw-out bearing was completely seized.
yosh took this pic of james with garagetune working his *** off under my car (keep in mind i was running,and just came in off course and we got to work) everything was still super hot.. in the rush of the madness, i think this may be the only photo taken.
Paul (eakine) was posted on the jack, ray (mickeymouse/whitecomet) was on the other side getting the starter off, kevin phil & james were banging out the driveshaft/downpipe. there were so many people helping... idk where i was in this pic lol.
#197
Made it to the VD 19 practice event on friday, drove hard all night, and came back saturday for practice, and qualifying... then it happened..
with an hour and ten mins left in the last practice session before the drivers meeting for qualifying, my exedy clutch decided to die off. (all day, and the last few runs on friday i noticed clutch hydraulic issues/noises, or so i thought.)
come to find out not only was my clutch in pieces, but my throw-out bearing was completely seized.
yosh took this pic (below) of james with garagetune working his *** off under my car (keep in mind i was running,and just came in off course and we got to work) everything was still super hot.. in the rush of the madness, i think this may be the only photo taken.
Paul (eakine) was posted on the jack, ray (mickeymouse/whitecomet) was on the other side getting the starter off, kevin phil & james were banging out the driveshaft/downpipe. there were so many people helping... idk where i was in this pic lol.
streetportvert's photos
here it looks like the car fell out of the sky ang landed on them haha jk.
clutch killer.
relief pic.
http://s112.photobucket.com/albums/n187/a7...nt=SDC12027.mp4
with an hour and ten mins left in the last practice session before the drivers meeting for qualifying, my exedy clutch decided to die off. (all day, and the last few runs on friday i noticed clutch hydraulic issues/noises, or so i thought.)
come to find out not only was my clutch in pieces, but my throw-out bearing was completely seized.
yosh took this pic (below) of james with garagetune working his *** off under my car (keep in mind i was running,and just came in off course and we got to work) everything was still super hot.. in the rush of the madness, i think this may be the only photo taken.
Paul (eakine) was posted on the jack, ray (mickeymouse/whitecomet) was on the other side getting the starter off, kevin phil & james were banging out the driveshaft/downpipe. there were so many people helping... idk where i was in this pic lol.
streetportvert's photos
here it looks like the car fell out of the sky ang landed on them haha jk.
clutch killer.
relief pic.
http://s112.photobucket.com/albums/n187/a7...nt=SDC12027.mp4
#198
\\TRASHTALK//
damn dude looks like your doing pretty good.
ill be at forrest's shop the 15th to chill and get some **** done. I was lookin to tandem with you but I blew my haltech saturday. i might have one before i go...
ill be at forrest's shop the 15th to chill and get some **** done. I was lookin to tandem with you but I blew my haltech saturday. i might have one before i go...
#199
hopefully you get it fixed. i'd love to see your car! dude, let me buy the AME's from forrest! haha i need to step my fitment up for widefenders!