Buckey's Pro-Am Build: '87 Mazda RX7 TurboII
#1302
nothing cool was even going on here, but here's the video.
http://www.youtube.com/watch?v=KY9oxoEP4vs
http://www.youtube.com/watch?feature...&v=EmuG_UzWgUc
#1305
My car is green
iTrader: (7)
Join Date: Oct 2003
Location: Reading PA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
selling my injectors, turbo kit, and doing a GTX3582r. might keep the manifold so i'm not spending millions, but who knows. Doc race seems way good for pretty decent pricing. aside from that stuff i'm looking into OS Giken clutch, diff, and hitting up Hot Line for chassis setup.
Sucks ***** about the door, but at least its just a door, hopefully it didnt mess up the door bars too bad... they're cake too though.
If you're looking at a Giken Twin Disc Watch out if you're super clutch kick happy. They arent as forgiving on driveline stuff as a 6 puck. I know more people than I can count on one hand that started breaking a whooooooole lotta **** (axle after axle after axle after trans after trans after driveshaft) when switching to a Twin Disc... The clutch never slipped though :-]
#1307
That turbo is a ******* awesome piece forrealz.
Sucks ***** about the door, but at least its just a door, hopefully it didnt mess up the door bars too bad... they're cake too though.
If you're looking at a Giken Twin Disc Watch out if you're super clutch kick happy. They arent as forgiving on driveline stuff as a 6 puck. I know more people than I can count on one hand that started breaking a whooooooole lotta **** (axle after axle after axle after trans after trans after driveshaft) when switching to a Twin Disc... The clutch never slipped though :-]
Sucks ***** about the door, but at least its just a door, hopefully it didnt mess up the door bars too bad... they're cake too though.
If you're looking at a Giken Twin Disc Watch out if you're super clutch kick happy. They arent as forgiving on driveline stuff as a 6 puck. I know more people than I can count on one hand that started breaking a whooooooole lotta **** (axle after axle after axle after trans after trans after driveshaft) when switching to a Twin Disc... The clutch never slipped though :-]
having control of slipping it at high revs off the line would help a **** load with traction, and me getting paced by everyone.
door bars are donezo, but the rest of the cage is good. the door hinge mounts are what im worried about. id like to have it pulled back, but idk anyone that will be able to do it.
#1309
My car is green
iTrader: (7)
Join Date: Oct 2003
Location: Reading PA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
i am super clutch bomb happy. i was wanting the twin plate so i can slip as opposed to on/off switch 6puck.
having control of slipping it at high revs off the line would help a **** load with traction, and me getting paced by everyone.
door bars are donezo, but the rest of the cage is good. the door hinge mounts are what im worried about. id like to have it pulled back, but idk anyone that will be able to do it.
having control of slipping it at high revs off the line would help a **** load with traction, and me getting paced by everyone.
door bars are donezo, but the rest of the cage is good. the door hinge mounts are what im worried about. id like to have it pulled back, but idk anyone that will be able to do it.
GTX3582 on like 25lbs on race gas... people are gonna have to put in work to pace you in any circumstance.
For the door hinges you can always go ghetto with a cable come-along and a big tree lol.
#1312
Hot Line
iTrader: (13)
Manny, Buckey and anyone else that's interested... I've ran both the OS twin and Exedy twin, between the two the OS is much more forgiving on transmission and diffs/axles... a Exedy Hyper single is by far the most forgiving, but plan on switching out clutch discs every couple events...
#1313
Manny, Buckey and anyone else that's interested... I've ran both the OS twin and Exedy twin, between the two the OS is much more forgiving on transmission and diffs/axles... a Exedy Hyper single is by far the most forgiving, but plan on switching out clutch discs every couple events...
i am way sick of getting paced on the line. i want to start being the ****** that paces others.. the motor is coming out tomorrow to get off to my tuner. going to be super busy this week, but i want to get this **** jamming so i can actually drive the car prior to rd.2
#1317
My car is green
iTrader: (7)
Join Date: Oct 2003
Location: Reading PA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
^a single.
To be completely honest, I'd feel safer if you took that car making 460 on 18lbs, drained the 91 octane swill out of it, sold the meth injection. Run the boost up to 25lbs, dumb down the timing a couple of degrees over 20lbs, fatten the fuel up half to three-quarters of a point, ran c16 and heat range 10 plugs gapped to .025. Good seals, and good (turblown) studs. Now that 570hp car is making 525 on a safe tune, giving me IMHO, a car just as safe as 460 on 18lbs and more peace of mind over the possible component failure of the added bs with meth injection leading to detonation. Plus you now have all the rotary awesomeness of sucking down mad fuel, shooting 8 foot fireballs and your car sounding like a fleet of naval cannons when youre riding the limiter. Plus it'll still blow the doors in on any other car on the xdc grid.
...because race car.
Boost isn't what blows up motors, it's the tuner that blows em up.
To be completely honest, I'd feel safer if you took that car making 460 on 18lbs, drained the 91 octane swill out of it, sold the meth injection. Run the boost up to 25lbs, dumb down the timing a couple of degrees over 20lbs, fatten the fuel up half to three-quarters of a point, ran c16 and heat range 10 plugs gapped to .025. Good seals, and good (turblown) studs. Now that 570hp car is making 525 on a safe tune, giving me IMHO, a car just as safe as 460 on 18lbs and more peace of mind over the possible component failure of the added bs with meth injection leading to detonation. Plus you now have all the rotary awesomeness of sucking down mad fuel, shooting 8 foot fireballs and your car sounding like a fleet of naval cannons when youre riding the limiter. Plus it'll still blow the doors in on any other car on the xdc grid.
...because race car.
Boost isn't what blows up motors, it's the tuner that blows em up.
#1318
My car is green
iTrader: (7)
Join Date: Oct 2003
Location: Reading PA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
.... You could always run 18lbs on race gas, make like 475 and never ever have a problem... Keeping it simple.
I've been steering away from aux injection due to the fact it's just another variable for failure... And the simpler it is, to me, less chance for disappointment.
I've been steering away from aux injection due to the fact it's just another variable for failure... And the simpler it is, to me, less chance for disappointment.
#1321
Stay Into It!
iTrader: (1)
Just got on Facebook and drift just posted pics of the passenger door smashed in. They have a habit of posting old pictures but was this one recent? Car looks to be in the same condition (as far as the kit and paint) as the pic above just with a munched door. Any updates or is this old news?
Edit: Just looked again and Drift shared it from Buckeys facebook page... he posted the pic 4 hours ago. Sorry to share your misfortune Buckey, hope to hear more about it tho(any plans to fix it up or is it time for a chassis switch)?
Edit: Just looked again and Drift shared it from Buckeys facebook page... he posted the pic 4 hours ago. Sorry to share your misfortune Buckey, hope to hear more about it tho(any plans to fix it up or is it time for a chassis switch)?
Last edited by rx7w/yaw; 02-21-12 at 07:45 PM.
#1322
Just got on Facebook and drift just posted pics of the passenger door smashed in. They have a habit of posting old pictures but was this one recent? Car looks to be in the same condition (as far as the kit and paint) as the pic above just with a munched door. Any updates or is this old news?
Edit: Just looked again and Drift shared it from Buckeys facebook page... he posted the pic 4 hours ago. Sorry to share your misfortune Buckey, hope to hear more about it tho(any plans to fix it up or is it time for a chassis switch)?
Edit: Just looked again and Drift shared it from Buckeys facebook page... he posted the pic 4 hours ago. Sorry to share your misfortune Buckey, hope to hear more about it tho(any plans to fix it up or is it time for a chassis switch)?
#1323
Like a Boss
Tried shooting you a message on facebook, holler at me when you get a chance man I'm sure your busy. Next event will be better man! I know you'll get her back up and running better than ever for the next one..just lemme know if you need anything. Car looks amazing!
Last edited by Boss.One; 02-22-12 at 10:02 PM.
#1324
door won't open/close. this was just mounted with the top mount only. monday i will know if Spring Mt. Autobody can pull the mounts back well enough to use them.
ordering a used ACT 6puck from a friend to get my car mobile while i try to find a cheap twin plate clutch.
going to buy, or trade some things for a real diff. hopefully on top of all of this crap get rear toe links, and 4 different injectors, pay for dyno time, pay my tuner to retune my car, and either blow it up (most likely) or break a tranny, and still probably blow it up at XDC.... getting pretty unmotivated with the amount of **** that has went wrong lately...