thewird's 20B Track Beast Project Finally Started :D
#227
Some more progress today. Oil pan FINALLY welded with no leaks, sump built and welded, and then anti-sludge coating applied. Dave asked me to not show the sump though... Older guys like keeping their secrets, I'll respect that.
Also took apart the FEED throttle body, cleaned it, painted it and regreased the springs.
Marco
Also took apart the FEED throttle body, cleaned it, painted it and regreased the springs.
Marco
#233
Current progress... routed most of the wiring and modified the intercooler brackets a hair and mounted it in place with a bunch of woods holding in place. Once the turbo manifold is built, I'll be able to spin the turbo clockwise a bit, cut off the end to slip on a hose and zero pre-intercooler piping is achieved.
thewird
#234
Friendly stalker
Hey Marco - let me know if you want a second set of hands and some decent company, it wouldn't hurt for me to learn a thing or twohundred.
PM me, no worries if you've got all the help you need
PM me, no worries if you've got all the help you need
#237
Rotary Enthusiast
Your parts are works of art.
#238
Updates and current progress... Lots of little things accomplished. Alternator bracket almost done, more wiring done, FD throttle body modified to mount to 20b upper intake since its a large FEED one, manifold almost done, and downpipe almost done as well.
thewird
thewird
#240
30 YEARS OF ROTARY POWER
Join Date: Dec 2006
Location: NEWMARKET,ONTARIO CANADA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Looking good Marco. Not Dave, I mean the turbo. Lol. It's about time someone got that old fart to smile.
Last edited by rx7rocks; 03-29-13 at 10:57 PM. Reason: Edit