Zeitronix ZT-3 Hacker Display Install in "Sleeper" Turbo II
#1
Concerned Citizen
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Miltown, WI
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Zeitronix ZT-3 Hacker Display Install in "Sleeper" Turbo II
Well since I decided to go with the Rtek 2.1 on my Turbo II, I figured the Zeitronix Hacker display would be the best fit wide band O2 sensor option to go with. My goal for the car is to have any aftermarket gauges/tech mostly unnoticeable except for some avid enthusiasts or people that know what they are looking for/at.
Since I did a bunch of searches on the forum and found nothing that really interested me with gauge installs, ie hacking up the stock cluster or having an a-pillar gauge pod. There is nothing wrong with them, just not the direction I'm looking at going for this build.
So, I had an idea, since the clock already has problems with cold solder joints and works intermittently, why not get rid of it?
So I bought this:
Zeitronix Hacker/Tweaker Display : Mini-AFR Display
Dis-assembly of the idiot lights is pretty self explanatory.
1) Pop the cluster surround out and unscrew the 2 screws holding it in. Also unplug the connector from the back.
2)There are 3 screws on the back that hold it together. It may be a little tough to separate, however it does come apart.
3) Unfold the clock circuit board and de-solder it. If you follow the traces, it appears that the power sources are completely unaffected/separate from the clock removal for the idiot lights. I verified a couple months ago, but I have yet to place in the car and verify.
4) After the clock removal, I honestly just mocked it up and hot glued it in .
I wanted to mount it directly on the backing plate you can see in the pictures below, however I noticed that I couldn't see some of the numbers being displayed. Therefore I decided to mount it set back a bit on the circuit board. Hope you enjoy:
Hopefully it looks just as good in the car.
Thanks for looking.
Since I did a bunch of searches on the forum and found nothing that really interested me with gauge installs, ie hacking up the stock cluster or having an a-pillar gauge pod. There is nothing wrong with them, just not the direction I'm looking at going for this build.
So, I had an idea, since the clock already has problems with cold solder joints and works intermittently, why not get rid of it?
So I bought this:
Zeitronix Hacker/Tweaker Display : Mini-AFR Display
Dis-assembly of the idiot lights is pretty self explanatory.
1) Pop the cluster surround out and unscrew the 2 screws holding it in. Also unplug the connector from the back.
2)There are 3 screws on the back that hold it together. It may be a little tough to separate, however it does come apart.
3) Unfold the clock circuit board and de-solder it. If you follow the traces, it appears that the power sources are completely unaffected/separate from the clock removal for the idiot lights. I verified a couple months ago, but I have yet to place in the car and verify.
4) After the clock removal, I honestly just mocked it up and hot glued it in .
I wanted to mount it directly on the backing plate you can see in the pictures below, however I noticed that I couldn't see some of the numbers being displayed. Therefore I decided to mount it set back a bit on the circuit board. Hope you enjoy:
Hopefully it looks just as good in the car.
Thanks for looking.
#3
Concerned Citizen
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Miltown, WI
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Looks that way yeah. If you buy the $199 version you end up getting one with the kit you just ordered.
It also comes with the power harness that has a 0-5V output and the website informs you how to wire it into the ECU to give it the 0-1V needed to trick the computer into thinking it sees a narrow band voltage again.
I researched for a while, and it seems that the Rtek Pocketlogger guys have been working with the Zeitronix to ensure the proper functionality. Again, that's all in theory as its been too damn cold to go and work on the car to get it going again.
It also comes with the power harness that has a 0-5V output and the website informs you how to wire it into the ECU to give it the 0-1V needed to trick the computer into thinking it sees a narrow band voltage again.
I researched for a while, and it seems that the Rtek Pocketlogger guys have been working with the Zeitronix to ensure the proper functionality. Again, that's all in theory as its been too damn cold to go and work on the car to get it going again.
Trending Topics
#14
Concerned Citizen
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Miltown, WI
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys, Not sure why, hopefully here's some up to date links. For some reason I wasn't getting any notifications of posts.https://goo.gl/photos/7WXYz6mc2z5c3bmH8
Thread
Thread Starter
Forum
Replies
Last Post