more to come

 

small update:
got the rest of the front end cut out and working on some more fab work for the radiator and intercooler mock up..pics will be up shortly

 

so i been doing some work...finally mocked up the radiator for the v-mount setup...here are some pics

crash bar welded up

 

started to weld up the brackets for the bottom of the radiator

 

mocked up the radiator after welding the brackets....came out ok

 

put the bumper on to see what it would look like

 

next im going to get started on making the brackets for the top of the radiator and the intercooler but i have to make the top brace for the bumper support...cut out the top plate that the hood prop and hood latch sits on making a custom one at the moment...pics will up soon once i get it done and mocked up in the car

 

awsome build man

 

thanks man...its coming along nice...ill have more updates soon

 

i like your approach on the dash i had a lot of trouble with mine but i removed everything except the intrument cluster along with all the switches for the lights and blinkers
also im interested on the clutch setup you got how much do you think it would come out to be to ship to san diego ca im planning on drifting if that helps

 

thanks man...i can do 600 shipped and that comes with flywheel pressure plate clutch disc pilot and release bearing

 

update: been learning how to weld...started making the top brace for the radiator and intercooler to sit on and also cleaned up my wires and re wrapped them here are a few pics of the top brace..

on the welding bench




mock up in the car

 

brace for radiator to mount to

back on the bench for some welding





painted and on the car

 

this is how it looks currently how it looks with the wires wrapped and running along side the top brace

 

next week im going to work on mocking up the top brace for the intercooler and the bumper support...stay tuned

 

great progress!! looking good. keep up the hard work

 

thank you sir...i appreciate that

 

UPDATE:
so ive made some more progress yesterday...i finally got my top brace bent to where i needed it to be....and i cut holes and dimpled it myself...however the dimples didnt come out perfect but i can deal with it...here are a few pics

just had the brace bent to about 85 degrees on both sides


mocked it up in the car for the first time

made my holes for the dimple dyes

what its some what going to look like

 

dimple dyes didnt come out perfect but looks good none the less...first time doing it but came out nice


with the dimples in them



with the intercooler mocked up gonna make some tabs to mount the intercooler to the brace

 

next im going to make tabs for the intercooler to sit on and start mocking up the piping once thats done then im going to wire up the haltech to get things going here is a list of what i have

Haltech platinum sprint RE
Haltech tps
AEM map sensor (3.5 bar)
AEM boost controller
AEM wideband 02 sensor
ls7 ignition coils and wires
denso 720cc injectors (not sure im going to run these)
RC engineering 1000cc injectors (going to run in primaries)
denso 1600cc injectors (going to run in secondaries)
Garett stage 3 hybrid with custom internal wastegate
and more goodies that i cant name off the top of my head....will update as soon as possible

stay tuned.......

 

update intercooler is in and looking good things are coming along real nice...been getting better at welding as well






now going to start mocking up the bumper support




next its mocking up the piping
more to come

 

updates coming soon

 

quick little update:

picked up my injectors (1000cc primary 1600cc secondary) and also did some more fab work to the front end by making my bumper support...here are a few pics

injectors



front bumper support








still got to mock up the brackets for the oil cooler(s) and i just weled up plates for the crash bar piping more work to come stay tuned

 

small update

been really busy but did manage to do some work to the car...welded up the top brace and dzus the bumper on...next im mocking up the oil cooler...will have pics up soon....stay tuned

 

Hey guys. been real busy with the team stuff for the formula drift season we been trying to get some things together for long beach so i havent had time to update the status on my car so here is a little update so far as whats been going on:

mocked up the oil cooler as well as the power steering cooler
finally got the piping mocked up and my new manifold on that i modded for the haltech
and mocked up a separator plate for the front (may do it over)
sold my stock hood for an na hood and waiting for my drop vent to come in
made my custom oil cooler lines
here are a few pics of whats been going on:

made my brackets out of aluminum and hung it from the top brace