Mac's FC "Build" Thread
#228
I had another one where I got over the roof line, can't seem to find it lol. But yah, thanks again for the downpipe and clutch/flywheel. Both work beautifully!
Picked up an fcd to run temporarily until I get Rtek 1.7 and 720s. The car boosts so much smoother now. Just need to replace the engine to manifold gasket and replace the water jacket o-rings on the uim.
Boost I saw today:
1st-2nd gear: 9psi
2nd-3rd gear:11psi
3rd-4th gear: 12psi and climbing, I got scared and let off haha.
Last edited by _Mac_; 11-15-11 at 02:06 AM.
#232
Finally felt confident the car would make it on a semi long drive. I rolled with Nuisance to Chino for the Royal Origin car meet. Got there and back with ease! Definitely have a lot of boost creep in those higher gears though. Rocking my buddies Evo X wheels for now.
Some pics from the that night:
Some pics from the that night:
#236
All good, besides, there's no rotary heads around my area that roll out to meets/events and such.
Wastegate is ported but I didn't increase the flapper diameter. I just bored the wastegate opening for the stock sized flapper.
Thanks, but I feel like these wheels don't really suit the car well so I'm hoping to change that up soon. Its hard to be slammed on 245/40/18 in the front.
Thanks, but I feel like these wheels don't really suit the car well so I'm hoping to change that up soon. Its hard to be slammed on 245/40/18 in the front.
#237
Passion for Racing
Join Date: Aug 2010
Location: Crown Point, Indiana
Posts: 1,066
Likes: 0
Received 2 Likes
on
2 Posts
Ah I see. Well I'm sure there's plans in the works for a nice setup with it all. Hell my whole problem with going turbo is I wouldn't want anything less than the best, which kills me on a lot of things money wise.
#238
Thanks! Me too, sometimes lol.
Instead of going Black friday shopping at the malls and outlets, I made a few visits to the local junkyards for 50% off discount weekend.
First yard I couldn't find any fc's and felt like walking out with something so I picked up a Ford Taurus alternator. Going to autozone to test it out tomorrow.
Second yard I figured I'd go to the ford/mercury section to see if I could come up on some crown vic wheels. After walking around a few isles I saw a mesh wheel face down, got excited and sure enough I got me a stepped lip crown vic. Went on the other side of the car and found the other wheel also face down. Happy as hell I rushed towards the exit to go pay for them haha. Then came back to look for the other pair but couldn't find them. Can't complain though, a pair of vics with crap tires for dirt cheap is enough to make me happy.
#241
Passion for Racing
Join Date: Aug 2010
Location: Crown Point, Indiana
Posts: 1,066
Likes: 0
Received 2 Likes
on
2 Posts
God I cannot wait to pick up a pair of crown vics... What color did you use on them? I'm thinking of doing them with that color lip (although probably a bit darker and with a tint of something else) and a flat white center.
#244
Junior Member
Join Date: Nov 2011
Location: California
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Mac sorry if this a stupid question or any body who can answer this but with the crown Vic can you run standard suspension like kyb struts or do you gotta run coilovers indefinite?
#248
Junior Member
Join Date: Nov 2011
Location: California
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts