Kamikaze's 13B TII rebuild /expensive /no 56k
#30
Vintage sportcars
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Hello,
here are some new pictures from our 13B T2 Build. As I already stated a few posts earlier we are still waiting on a corner seal to arrive.
Hehe, enjoy the pictures =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/2_housing.jpg)
Housing mounted to the engine stand and first housing stacked !
Did I mention that my FC got hit while I was traveling to the store to get those damn 1,25 mm bolts to mount it on the stand ?? Assurance totaled it. *facepalm*
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/3_loading_rotors.jpg)
Loading the rotor with most of the seals. Some seals have been installed once the rotor went into its housing.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/4_install_seals.jpg)
Side seal fun.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/8_housing_rotor.jpg)
Damn ! It doesn´t fit. Tried another one ...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/5_install_seals_2.jpg)
Fits perfectly...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/6_housing_rotor.jpg)
A nice shot before all the side seals went in. I kinda like the atmosphere.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/10_rotor_tip.jpg)
Apex seal went in. We used the OEM corner seals with FD springs. The rubber plugs are new of course =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/11_rotor_tip_big.jpg)
A nice close up. Every scratch is visible ...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/12_apex_seal.jpg)
Oiling the surfaces ... Castrol 10W40.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/13_end_of_day.jpg)
Took a break for today. It was already morning. Someone recognize the suspension chilling there ? lol I bet you won't =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/14_polished_eshaft.jpg)
Polished E-shaft went in. Polishing that thing was not necessairy but its always a good idea. Cost 60$. Looks like new.
here are some new pictures from our 13B T2 Build. As I already stated a few posts earlier we are still waiting on a corner seal to arrive.
Hehe, enjoy the pictures =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/2_housing.jpg)
Housing mounted to the engine stand and first housing stacked !
Did I mention that my FC got hit while I was traveling to the store to get those damn 1,25 mm bolts to mount it on the stand ?? Assurance totaled it. *facepalm*
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/3_loading_rotors.jpg)
Loading the rotor with most of the seals. Some seals have been installed once the rotor went into its housing.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/4_install_seals.jpg)
Side seal fun.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/8_housing_rotor.jpg)
Damn ! It doesn´t fit. Tried another one ...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/5_install_seals_2.jpg)
Fits perfectly...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/6_housing_rotor.jpg)
A nice shot before all the side seals went in. I kinda like the atmosphere.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/10_rotor_tip.jpg)
Apex seal went in. We used the OEM corner seals with FD springs. The rubber plugs are new of course =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/11_rotor_tip_big.jpg)
A nice close up. Every scratch is visible ...
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/12_apex_seal.jpg)
Oiling the surfaces ... Castrol 10W40.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/13_end_of_day.jpg)
Took a break for today. It was already morning. Someone recognize the suspension chilling there ? lol I bet you won't =)
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/14_polished_eshaft.jpg)
Polished E-shaft went in. Polishing that thing was not necessairy but its always a good idea. Cost 60$. Looks like new.
#31
Vintage sportcars
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/8_intermediate_hylomar_3.jpg)
I guess this might be the right amount of hylomar.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/7_intermediate_hylomar_2.jpg)
This stuff really is a pita.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/6_intermediate_hylomar.jpg)
The next time I will hylomar the seals instead of the irons. Might be much better.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/9_water_seal.jpg)
But looks good. I like the porting too
![Nod](https://www.rx7club.com/images/smilies/nod.gif)
@ R-X-R
Is that a 12A rotor ? It looks a bit different from my 13B rotors. Specially the bathtub.
For the rust pits, apparently they are not that big of a deal as long as they are not too deep.
The 13B T2 rotors have them too. For the polishing I figured it works best when placing
the cloth on a wood plate putting polish ing liquid on it and sliding the rotor over it. This way you dont have to rub hours.
I used "Nigrin aluminium pflege", you might call it aluminium polish or chrome polish.
It is slightly abrasive. I found it removes the yellowish/brownish residue thats still on the rotor even after a good cleanup.
![](http://i1233.photobucket.com/albums/ff393/akagitofushop/rotor_before_polish.jpg)
The rotor on the left has been cleaned with wheel and parts cleaner. I used green scotch brite pads to get rid of the carbon. Before polish I washed it with water and then used brake cleaner to prevent rust.
The rotor on the right has not been cleaned at all. Thats how it came out.
I noticed WD40 did help a bit to for cleaning rotor, nothing to write home about but it did a bit. Also it keeps the rotor shiny and prevents rust while the rotor is outside.
Steven
#39
Vintage sportcars
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Still waiting for a corner seal lol ![Lol](https://www.rx7club.com/images/smilies/lol.gif)
We didn't really worked on it for the last couple of months.
It has to be finished. Took my 7 in the shop too, getting repaired and restored.
Not to mention the RX-8 sitting outside waiting for a new renesis![Icon Tup](https://www.rx7club.com/images/smilies/icon_tup.gif)
PO ran it dry of oil ... Such a waste ... You dont want to see the mess ...
We will travel over to london next week to pick up a new renesis![Icon Tup](https://www.rx7club.com/images/smilies/icon_tup.gif)
Steven
![Lol](https://www.rx7club.com/images/smilies/lol.gif)
We didn't really worked on it for the last couple of months.
It has to be finished. Took my 7 in the shop too, getting repaired and restored.
Not to mention the RX-8 sitting outside waiting for a new renesis
![Icon Tup](https://www.rx7club.com/images/smilies/icon_tup.gif)
PO ran it dry of oil ... Such a waste ... You dont want to see the mess ...
We will travel over to london next week to pick up a new renesis
![Icon Tup](https://www.rx7club.com/images/smilies/icon_tup.gif)
Steven
#41
Vintage sportcars
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
![Icon Tdown](https://www.rx7club.com/images/smilies/icon_tdown.gif)
Funny you mention fuel. Yesterday our heater went out in our house. 5k l tank was empty
![Lol](https://www.rx7club.com/images/smilies/lol.gif)
![Icon Tdown](https://www.rx7club.com/images/smilies/icon_tdown.gif)
Time to switch to pellets, for the saving I can buy every year a RX7
![Nod](https://www.rx7club.com/images/smilies/nod.gif)
#42
Like a G6
![](https://www.rx7club.com/images/misc/10_year_icon.png)
iTrader: (1)
Join Date: Dec 2007
Location: In the Dutch Mountains
Posts: 713
Likes: 0
Received 0 Likes
on
0 Posts
Hi, great topic! Love all the pictures, and the detail this rebuild is done with.
1,79€/L for 98 here... :-(
Riz.
Gasoline ? Thats no fuel, thats liquid money ! (1,344€/L and counting...)
Riz.
#43
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Since we are busy about fuel prices: I tank always in the Dats 24 in Mechelen and the price for 98 (Super+) is currently 1€627 and normal 95 = 1€573. I'm happy my daily car is a diesel 1€405
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM