Waz Yellow '94 in South Africa
#51
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
#52
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I see you know some south african lingo hey
Yeah put proper clutch one time dont wanna be dropping gearboxes in a month time when the clutch is slipping so bought a boykie of a clutch now!
Yeah but the guy said he can save the housing atleast
#53
bcrotary.
Join Date: Jul 2010
Location: Abbotsford, British Columbia
Posts: 513
Likes: 0
Received 1 Like
on
1 Post
Pending finances I may have to actually think about that PFC you're selling. Are the post office workers still striking/ burning the mail?
#55
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
A mate of mine got post on this weekend from July last year so there is still a massive backlog.
@7speed will reply to your PM now bud
#56
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Prepping Bay for paint
Done a bit of work this morning in preparation to spray the engine bay.
Took off the radiator, intercooler and oil coolers to give them a good clean and get them out the way dont want any overspray on my shiney bits
Bumper and headlights off
Oil coolers, intercooler and radiator removed
Koyo Radiator, Greddy intercooler and dual oil coolers pic before cleaning
Gonna strip one of the wheels tomorrow to see if I can get the dish anodized as Im changing the colour of the wheels
Bolts will get sent in to get plated in gold
Next week must go buy paint for faces of the wheels, paint for engine bay, and paint for some body parts im making gloss black
The part im dreading most is scrubbing the bay give it a good clean then all the masking off must commence for the stuff I dont want paint on like the brake booster, brake lines, power steering goodies etc
Took off the radiator, intercooler and oil coolers to give them a good clean and get them out the way dont want any overspray on my shiney bits
Bumper and headlights off
Oil coolers, intercooler and radiator removed
Koyo Radiator, Greddy intercooler and dual oil coolers pic before cleaning
Gonna strip one of the wheels tomorrow to see if I can get the dish anodized as Im changing the colour of the wheels
Bolts will get sent in to get plated in gold
Next week must go buy paint for faces of the wheels, paint for engine bay, and paint for some body parts im making gloss black
The part im dreading most is scrubbing the bay give it a good clean then all the masking off must commence for the stuff I dont want paint on like the brake booster, brake lines, power steering goodies etc
#57
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
#58
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Gave the engine bay a good clean yesterday
In this pic below you can see the bay was only sort of half painted there are two different shades of yellow
Another pic you can see the red paint showing and the two different yellows
I Also split one of my wheels to take the lips in to get anodized :hurray: :hurray:
In this pic below you can see the bay was only sort of half painted there are two different shades of yellow
Another pic you can see the red paint showing and the two different yellows
I Also split one of my wheels to take the lips in to get anodized :hurray: :hurray:
#59
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Today spent the morning sanding and spraying a few things
Sprayed a few parts silver this morning
Sprayed the bellhousing silver too
Sending the bottom piece of the engine bay by the chassis legs
My toppie Masking off places as we are spraying the lower portion of the bay black where you cant see much
And after spraying the black on the bottom half
Sprayed a few parts silver this morning
Sprayed the bellhousing silver too
Sending the bottom piece of the engine bay by the chassis legs
My toppie Masking off places as we are spraying the lower portion of the bay black where you cant see much
And after spraying the black on the bottom half
#62
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
So update time again
Engine bay got taped up in preperation for some paint
All sprayed
Masking tape and newspaper taken off
Yellow came out nicely.. The colour match is good and shines so nicely
Next were the wheels.
As you can see I got one of the wheels anodized to see how it would come out. If you look closely you can see where the anodising didnt stick to the welding where the wheel got repaired.
Only way of fixing this was to get a paint colour matched to the anodized colour.
Got the paint matched and collected the paint yesterday.
I will just be painting the outer edge of the lips with the paint and a gloss clear over it!
Here you can see where the anodising didnt stick to the wheel
I was going to go with this colour on my wheels
However Neeresh said it wouldnt work so leka with the anodizing so I am going with this colour now
Will start spraying the wheels and send them all in for anodizing next week hope they come out lekker
Picked up a fong kong original Nardi wheel till I can get an Original one.
Also ordered a Speedhunters Takata tow strap for my car as well as some Speedhunters stickers and an Air freshener
Went to check up on the engine this week. It is ready for assembly and should collect it next week
Some pics
Ported leka as well as a half bridge port was done.
Also found a Microtech Engine Management system for a steal so will be collecting that this weekend.
Thats all for now guys
Engine bay got taped up in preperation for some paint
All sprayed
Masking tape and newspaper taken off
Yellow came out nicely.. The colour match is good and shines so nicely
Next were the wheels.
As you can see I got one of the wheels anodized to see how it would come out. If you look closely you can see where the anodising didnt stick to the welding where the wheel got repaired.
Only way of fixing this was to get a paint colour matched to the anodized colour.
Got the paint matched and collected the paint yesterday.
I will just be painting the outer edge of the lips with the paint and a gloss clear over it!
Here you can see where the anodising didnt stick to the wheel
I was going to go with this colour on my wheels
However Neeresh said it wouldnt work so leka with the anodizing so I am going with this colour now
Will start spraying the wheels and send them all in for anodizing next week hope they come out lekker
Picked up a fong kong original Nardi wheel till I can get an Original one.
Also ordered a Speedhunters Takata tow strap for my car as well as some Speedhunters stickers and an Air freshener
Went to check up on the engine this week. It is ready for assembly and should collect it next week
Some pics
Ported leka as well as a half bridge port was done.
Also found a Microtech Engine Management system for a steal so will be collecting that this weekend.
Thats all for now guys
#66
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Believe me i cant wait either!! Got engine front cover alternator and few other things back from sandblasting and all other nuts and bolts that got plated so assembly will commence this week Gonna pick up a Microtech ECU today as well
#71
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
#73
Hungry for the Power
Thread Starter
Join Date: Oct 2013
Location: South Africa
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts