Waz Yellow '94 in South Africa
7 Attachment(s)
Hi Guys,
Im new to the forum but spoke to a few of you in the "Introduce yourself" section. Anyways... Picked up this beauty the other night. Spec list: Streetported Engine Mazdaspeed Bodykit SSR GT-03 Wheels Greddy Intercooler Greddy Compression tube ACT Clutch 99 spec front and rear lights Splitfire Gauges Koni Adjustable shocks Mazdaspeed Racing fuel pump Rotora Big brake kit GT35r turbo kit Synapse 60mm wastegate Turbosmart SQ BOV Koyo Racing radiator Apexi Power fc Fibre Glass custom vented bonnet Turbo timer Greddy boost controller First pic taken of the car when picking it up: Attachment 655728 On the way home the night we got the car Attachment 655729 After a wash and getting some rubber off the side of the car and cleaning it up a bit Attachment 655730 Attachment 655731 Attachment 655732 Engine still needs a wash and some attention but all in due time Attachment 655733 Meaty brakes and SSR wheels look lovely Attachment 655734 After the wash we started stripping the exhaust side of the engine to take the manifold off as there was a slight exhaust leak and the seals have perished in the turbo so it was smoking quite badly.:( Car should be back on the road in a week or two. Needs a good polish and a general once over and then I will be happy with it:icon_tup: Thanks for looking guys will update soon |
Nice looking car :)
Good luck! |
Looks pretty clean; congrats!!!
|
Thanks alot guys.!!
Turbo has been diagnosed and seems gonna cost over 600$ to fix here in South Africa. So I purchased the same turbo same size wheels and housings just not the ball bearing type for $650 new:nod: Gonna be installing it in a few hours. Will take pics of old and new turbo:icon_tup: |
Please do! What's is the estimated power output with the current map? :)
|
Other than the engine bay is looks super clean. And i like the matching bike
|
That's an interesting filler cap.
|
Originally Posted by Dowah
(Post 11638354)
Please do! What's is the estimated power output with the current map? :)
New turbo is being collected just now and the fitment will commense today.:icon_tup: |
Originally Posted by 89fc3sgtu
(Post 11638361)
Other than the engine bay is looks super clean. And i like the matching bike
|
Looking good!
|
New Turbo, and odds and ends
6 Attachment(s)
Hi guys a bit of an update for now..
Turbo was replaced as the turbo that came with the car's seals were buggered. My father and I tackled it ourselves one week and got it done! New and old Attachment 652941 Took the cooling panel plate that came with the car off as it looked all bent and cut skew. So we marked off some areas that needed to get cleaned up and cut more and got a new one made :mrgreen: Attachment 652942 Shot of the interior Attachment 652943 Took the car the other day to get the street tyres put on as it was on a set of Bridgestone semis Attachment 652944 Random shots of the car :mrgreen: :thumbup: Attachment 652945 Attachment 652946 |
Whats up dude, good to see you on this forum.
Hope all is well with the car, mine has been a disaster so new engine arriving in a week then onto putting it in and redoing everything I did to the previous motor. |
Originally Posted by RuffRx7
(Post 11664412)
Whats up dude, good to see you on this forum.
Hope all is well with the car, mine has been a disaster so new engine arriving in a week then onto putting it in and redoing everything I did to the previous motor. Yeah shit bro stories with these engines and heard dodgy things about the guy who biult your engine! Atleast you getting it sorted leka now and will be boosting soon! I want full bridgeport as well :( |
5 Attachment(s)
Hi guys been a while,
Eventually got the car insured and been using it :ylsuper: Car has been going very well. Been to a few shows with it and to a Dyno day.:icon_tup: The only problem i have come accross is the turbo oil drain hose is leaking so I am going to sort that out today Car also went in to get screamer pipe done as the dumptube went back in to the downpipe when I bought the car. People checking out the engine bay once I opened the bonnet Attachment 650983 My car with an older generation Rx7 at a show this passed weekend Attachment 650984 At a VW show I went to LOL Attachment 650985 My new key with my car in the background Attachment 650986 HKS airfilter I bought Attachment 650987 Sadly we will need to modify a few things before it can fit. Going to a photoshoot this weekend so hopefully they snap some nice pictures of the car. Also going to raise the boost a bit in the next week. :wave: Cheers for now |
What did you make on the Dyno Bud?
|
Originally Posted by RuffRx7
(Post 11682227)
What did you make on the Dyno Bud?
|
Going to a dyno evening later on will put the car on the rollers and see what power its making:icon_tup:
|
Dyno Graphs and Pics
Hi guys
Oil feed line from turbo to sump has been sorted! Also raised the boost slightly from .4 bar to .6 bar! Later that evening decided to go to a dyno evening to see what figures the car is making http://img.tapatalk.com/d/14/03/03/y3ymenyv.jpg 283hp - 208kw Polished the car for the first time the other day http://img.tapatalk.com/d/14/03/03/hu5usu9a.jpg Some pics from a photoshoot I went to with the local VW club http://img.tapatalk.com/d/14/03/03/ypu3uve8.jpg http://img.tapatalk.com/d/14/03/03/8e8epa8y.jpg http://img.tapatalk.com/d/14/03/03/zegatyty.jpg http://img.tapatalk.com/d/14/03/03/da5a9y4u.jpg http://img.tapatalk.com/d/14/03/03/saqa6e5y.jpg http://img.tapatalk.com/d/14/03/03/ypery9yg.jpg http://img.tapatalk.com/d/14/03/03/najeqebu.jpg |
On saturday I went with some guys from the local rotary club to a tuner for a few dyno runs!
http://img.tapatalk.com/d/14/03/03/8aveda6e.jpg 213.9kw on the wheels One of the other cars on the dyno http://img.tapatalk.com/d/14/03/03/aga6a2ev.jpg |
Nice car... I highly suggest you replace or eliminate that stock AST and make shift coolant neck cap, Its a disaster waiting to happen.
|
Originally Posted by MSTHTD1
(Post 11692556)
Nice car... I highly suggest you replace or eliminate that stock AST and make shift coolant neck cap, Its a disaster waiting to happen.
|
Originally Posted by waz_05
(Post 11693266)
What do you suggest I do?
|
Hi guys been a while
The car has been running so leka im very happy with it! Gonna turn the boost up soon though[emoji1] I also got stuck in to the boot the other day! I had to throw the biscuit spare wheel away as it woouldnt fit over the BBK! Got a spare 18" wheel but now the boot carpet wouldn't fit over the wheel so made our own boot carpet. http://img.tapatalk.com/d/14/06/02/u2y6aju3.jpg Did the ducting for the oil coolers in black the other day as the aluminium colour looked kak http://img.tapatalk.com/d/14/06/02/ujy3ajej.jpg While I was at it I sprayed the mesh in the sideskirts and the fender in black as the guys who sprayed the car didnt remove the mesh when spraying the car! Looks waay better now! http://img.tapatalk.com/d/14/06/02/u6etysyz.jpg Got some llumar tint on the windows as well! Was getting 3rd degree burns driving without window tint Some pics from the passed few months http://img.tapatalk.com/d/14/06/02/ahy9esaj.jpg http://img.tapatalk.com/d/14/06/02/amahy5ar.jpg http://img.tapatalk.com/d/14/06/02/9y5a3ytu.jpghttp://img.tapatalk.com/d/14/06/02/ta9yma3a.jpg |
Backbox fitted as well as straight pipe
5 Attachment(s)
So eventually got the exhaust on after so long
Attachment 634588 Went to install the backbox. Also cut out the centre silencer box and replaced with straight pipe. Thanks to Nico for hooking me up some 90mm piping Attachment 634589 Here is a shot of the backbox. That is a 1Litre coke inside there Attachment 634590 A pic just after the rear box was mounted cant see too leka Attachment 634591 And a shot I took in the evening Attachment 634592 |
1 Attachment(s)
Went to a Dyno Day the other day and ran the car at around 9:30pm
Will get a pic of the graph asap.. Made 241KW and around 323NM on the wheels at 0.8bar boost A random pic I found of the car from the previous owner tracking it at our local circuit Kyalami race track Attachment 634587 |
All times are GMT -5. The time now is 09:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands