Rotormotor.be project
#251
Senior Member
#256
Senior Member
iTrader: (3)
Join Date: Jan 2007
Location: Fort Rucker, Alabama
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Wow, can't believe I just found this thread! Although I am not a big fan of huge car audio systems, the fab work is pretty sweet. That dashboard work is crazy. Cannot wait to see a complete interior. Did you find the fortune kit needs a ton of molding to fit right?
#258
Senior Member
Thread Starter
i searched a bit around but how to mount the alternator on the position of the power steering .
as i don't have a/c or power steering i would like to mount it there but seems not to be a thread for the fd of i missed it
as i don't have a/c or power steering i would like to mount it there but seems not to be a thread for the fd of i missed it
#263
Senior Member
iTrader: (3)
Join Date: Jan 2007
Location: Fort Rucker, Alabama
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
If it hasn't been asked before, since Belgians drive on the right side of the road like most of the World, why the right hand drive FD? Just curious!
#264
Senior Member
Thread Starter
hehe it's a question everybody asks me but it's not pink i can't get the true color on camera
BUT i'm planning to buy a new camera soon hope i can catch the color then.
the reason for a right hand driven car in belgium for driving on the right side of the road is very simpel
no dead corner for looking back i can see everything and i don't get surprised , i shift better with left hand :p , a jap car must be RHD , much easerier to park the car on the side of the road and i think more that i have forgot for the moment :p
BUT i'm planning to buy a new camera soon hope i can catch the color then.
the reason for a right hand driven car in belgium for driving on the right side of the road is very simpel
no dead corner for looking back i can see everything and i don't get surprised , i shift better with left hand :p , a jap car must be RHD , much easerier to park the car on the side of the road and i think more that i have forgot for the moment :p
#266
Senior Member
Thread Starter
i know i know shame on me ... but it was not really easy with the button's and infrared receiver in front so the silver bezel wil be painted in the future so it will match the rest but now it's just in it for the wiring and testing
#270
Senior Member
Thread Starter
what connectors can i remove if i will be working with the PFC for single turbo setup ?
and do i need resistors or not ?
i did some reasearch but i'm bit of a noob and don't find what i can remove and what should stay
and do i need resistors or not ?
i did some reasearch but i'm bit of a noob and don't find what i can remove and what should stay
#271
I can't see my car **(
iTrader: (16)
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/modification-wire-harness-eliminated-lot-things-935580/
Some people variate but its some direction. I would leave the omp
Some people variate but its some direction. I would leave the omp
#272
Senior Member
Thread Starter
there a few what i don't know anymore what they are.
this one is near the oil pressure sensor
these wires i have located and the one's in fat i'm pretty sure they need to stay
B1-15 injector pri front
B1-16 injector pri rear
B1-17 injector sec front
B1-18 injector sec rear
B1-22 fuel thermo sensor
B1-23 split air bypass valve
B1-26 prc solenoid valve
B1-27 secondary air bypass valve
B1-28 secondary air switching valve
B1-29 egr solenoid valve
B1-32 charge control solenoid valve
B1-34 charge relief solenoid valve
B1-35 idle air control valve
B1-37 turbo precontrol solenoid valve
B1-38 wastegate control solenoid valve
B1-39 purge solenoid valve
B1-40 oil metering pump
B1-42 intake air temp sensor
B1-43 trottle position sensor
B1-46 knock sensor
B2-07 water thermoswith
C1-05 oil pressure switch
C1-07 coolant level sensor
this one is near the oil pressure sensor
these wires i have located and the one's in fat i'm pretty sure they need to stay
B1-15 injector pri front
B1-16 injector pri rear
B1-17 injector sec front
B1-18 injector sec rear
B1-22 fuel thermo sensor
B1-23 split air bypass valve
B1-26 prc solenoid valve
B1-27 secondary air bypass valve
B1-28 secondary air switching valve
B1-29 egr solenoid valve
B1-32 charge control solenoid valve
B1-34 charge relief solenoid valve
B1-35 idle air control valve
B1-37 turbo precontrol solenoid valve
B1-38 wastegate control solenoid valve
B1-39 purge solenoid valve
B1-40 oil metering pump
B1-42 intake air temp sensor
B1-43 trottle position sensor
B1-46 knock sensor
B2-07 water thermoswith
C1-05 oil pressure switch
C1-07 coolant level sensor
#275
Senior Member
Thread Starter
i got them
first 2 are from the piece mounted on the inside from the LIM
and 4 is from thermoswitch on the back from the waterpump housing
only 5 is unknown but it's from the wiring loom from alternator and fuses in engine bay i think.
first 2 are from the piece mounted on the inside from the LIM
and 4 is from thermoswitch on the back from the waterpump housing
only 5 is unknown but it's from the wiring loom from alternator and fuses in engine bay i think.