Rx_Sam

indeed with that rubber seal in it, it seals
there is tension on the brackets when i fasten the rail to the lim
thanks problem solved :p now some time to mount everything on the engine.

mannykiller

iTrader: (93)

Is that the injector diffusor? if so.. injectors these days are just fine without them. Also...They ruined Howard Colemans motor after they failed and where inhaled into his housings.. I'd get rid of them. It's not worth it if they fail and come apart. What kind of injectors are you using?

p.s. Been following your build since the beginning.. one of my favorites!!

Rx_Sam

they are removed so wont be using them
the injectors are from ' fuel injector clinic' http://www.fuelinjectorclinic.com/
my choice went to these because they are high impedance and didn't want to use resistors.
hopefully i make good choices

KKMpunkrock2011

iTrader: (5)

I've been told numerous times that the primaries are highly recommended, I pulled the secondaries out though. Glad to hear that worked out for ya. Why those injectors and not some injector dynamics ones? I got a pretty good price on mine from a member here.

Rx_Sam

Rx_Sam

EllaMoto

iTrader: (1)

woww!! what a car!
i hope ill start my own fortune some day.
Btw do you speak french? or vlaams?

Rx_Sam

tis hem in het vlaams te doen hier :p

EllaMoto

iTrader: (1)

Ik zou em wel eens in het echt willen bewonderen!
kgaat als het lukken wil volgnde maand een fd halen uit de uk.
dan word het sparen & sparen voor de fortune kit!
Hoe is de montage ervan?
en hoe is de afwerking er van?

Rx_Sam

altijd welkom ze om eens te komen kijken
super ! doen :p maar ik raad je aan de originele te kopen
niet zoals ik de replica uit engeland tenzij je wilt besparen en veel zelf kan doen kwa polyesther werken.

EllaMoto

iTrader: (1)

Lijkt me leuk om dat eens in de verdere details te bespreken!
waar bent gij gelokaliseerd in België dan maken we eens een afspraak binnenkort

Weet niet of zaterdag 4 Juni u uitkomt?

Rx_Sam

in Oosterzele. normaal gezien ben ik thuis de 4de juni.

Rx_Sam

1 door panel finished

and the other almost finished

KKMpunkrock2011

iTrader: (5)

that's pretty similar to German isn't it? I'm catching bits and pieces that look similar that make sense together.

Rx_Sam

German language is a bit different then dutch but some words are similar yes
Gmonsen i know but i'll see what the fuel clinic injectors will do and if i'm happy with them. i have them now and can always change them

btw i have question can somebody help me to get asanti wheels cheaper then the price most sellers ask ?? because if i buy them in belgium they are way to much ! so i'm looking for a seller/shop in the US or somewhere else that can deliver them on a better price.

unreal-icarus

iTrader: (1)

nice door panels . concerning german/dutch language. for germans dutch sounds kind of funny. but i think its the same vise versa.

Rx_Sam

indeed unreal-icarus

EllaMoto

iTrader: (1)

Als jij het goed vind kom ik aanstaande zaterdagmiddag de koffiebonen opmaken :P

Rx_Sam

ik ben thuis dus geen probleem

EllaMoto

iTrader: (1)

Oke Nice als je je adres in een pm wilt sturen kom ik morgen middag bij je aan.
Is morgen middag rond uurtje of 2/3 goed?

Rx_Sam

ja hoor dat is goed je zal me wel bezig zien als je voor men huis staat de garage zal wss open staan en ik zal aan het schuren zijn

Rx_Sam

what is the best for the oil thermostat ? a 180°F or a 200°F ??

KKMpunkrock2011

iTrader: (5)

I would do 180 personally.

EllaMoto

iTrader: (1)

It was nice meeting you!



Saturday im going for my fd
I making up my mind and also considering to get the same kit as urs.
It will be a hell of a job but perhaps, cheaper at the end.

Big shout out to what this man has accomplished
ill see you again....
somday

Rx_Sam

the same here and you know always welcome if you are in the neighbourhood
Good luck

little update
a few pieces in spray filler more to go