jacobcartmill

iTrader: (6)

ceylon, i love that spiritR tach!

quick question: do you have any idea where i could buy only a 99+ (or spiritR) tach unit without buying the entire cluster?

Ceylon

iTrader: (3)

Either direct from Mazda or second hand at auction for a '99, haven't seen a spirit one come up in a long while at auction.... Or buy mine, its for sale atm .

jacobcartmill

iTrader: (6)

you'd sell just the tach? PM me a price!

Ceylon

iTrader: (3)

So its gone from an agricultural oil cooled T04e to a water cooled T04e/s hybrid, rebuilt using all genuine Garrett parts .

Need to get a reverse threaded nut to secure the comp wheel, polish the comp housing & weld a v-band flange on the rear housing then shes done .

silverTRD

iTrader: (37)

Looking good, where did you get the rebuild parts?

Ceylon

iTrader: (3)

Most of the parts were from turborebuild.co.uk. They had to import some bits, but it all arrived within a week or so & the costs we're quite reasonable. Seems pretty easy to get hold of T04 parts .

Ceylon

iTrader: (3)

Last coat of lacquer on, will need to be buffed to make it shine, but I don't think it looks too bad .

Dowah

Great work! When I see things like this my last months as a poor student seems like an eternity!

I'm both impressed and extremely jealous!

Fd3BOOST

iTrader: (7)

Looking good! Did you spray it outside? I've heard you guys get a lot of rain in the UK, did you have to time it for the weather?

Ceylon

iTrader: (3)

Thanks! Yeah we get a fair bit of rain, but the humidity is more the issue here, its been super high all winter. Its just starting to get nice out now, though. I've been spraying it outside, but inside a gazebo to keep off as much dust etc as possible .

I will be getting the exterior sprayed professionally, don't trust myself with that bit .

Ceylon

iTrader: (3)

Few bits back in the bay :

WP_20140419_18_04_15_Pro by Tom Kinsman, on Flickr

WP_20140421_17_14_59_Pro by Tom Kinsman, on Flickr

Fuel tank back in:

WP_20140421_19_42_37_Pro by Tom Kinsman, on Flickr

Picked up another S8 OMP, cant hurt to have spares

WP_20140415_17_54_32_Pro by Tom Kinsman, on Flickr

Swapped the 30th anny gauges into the UKDM housing to retain the UKDM warning light locations. Also converted the speedo to mph, moved the mileage chip over & removed the now redundant cruise control module.

WP_20140420_13_53_40_Pro by Tom Kinsman, on Flickr

Got a fair bit done on the interior, all the plastics and vinyl parts have been either dyed or painted satin black, looks much better than stock imo. Nice to have some interior in the car .

WP_20140421_14_30_29_Pro by Tom Kinsman, on Flickr

The seat isn't scratched, its just the light picking up the weave

WP_20140421_14_30_40_Pro by Tom Kinsman, on Flickr

Heater panel is from a 2001 model, as I needed it to be green backlit to match my 30th anny cluster.

Ceylon

iTrader: (3)

Trying to capture the vinyl dye finish, its darker in person:

WP_20140421_17_14_15_Pro by Tom Kinsman, on Flickr

Alarm light fitted:

WP_20140421_17_14_41_Pro by Tom Kinsman, on Flickr
WP_20140421_17_13_01_Pro by Tom Kinsman, on Flickr

WP_20140421_17_13_45_Pro by Tom Kinsman, on Flickr
WP_20140421_17_13_54_Pro by Tom Kinsman, on Flickr

silver_7

Wow...your car is coming along very well. Like the little details.

Fd3BOOST

iTrader: (7)

I like the steering wheel, which one is it?

Ceylon

iTrader: (3)

Thanks!

Its a Personal Grinta that I had recovered.

mannykiller

iTrader: (93)

very nice!!

jacobcartmill

iTrader: (6)

i see it's not ALWAYS cloudy in the UK

great thread. i keep checking it for updates.

ThunderSprinter

Looking good, love the Regamasters. What size are they?

Ceylon

iTrader: (3)

Cheers guys .

The Regamasters are 17x9 +38 all round. I'll need a small spacer in the rear, shouldn't need one up front as the Project Mu disks act as a small spacers themselves with the aluminium bells being thicker than the stock disks.

They'll be getting new tires before being fitted .

EFS.O

Nice build.Are you happy with the project m caliper pistons?.Is there any noticable difference in weight-and finally do they come with a seal kit?

Ceylon

iTrader: (3)

I haven't driven the car yet, but I imagine they work just fine. The pistons are 66% lighter than the originals, the difference in weight is very noticeable when they're in your hard. They do come with a seal kit.

HTH.

tt7hvn

iTrader: (5)

Quick question about your steering wheel; did you have to remove the whole airbag system? or did you just remove the harness for the wheel itself?

I've debated doing this but I don't want the airbag light to come on.

Ceylon

iTrader: (3)

Most people simply remove the airbag and remove the bulb from the cluster to stop the light, which will work fine.

I've removed the airbag ecu, crash sensors & every wire of the air bag system. Its surprising how much it all weighs. If you do do this, only thing to note is you'll need to run a new wire to the horn switch, as in stock config the horn switch ground passes through the airbag ecu. Its easier than it sounds, just need to run a wire from the front harness connector in the footwell to the horn .

Would be very easy to do on your black car as its already all in bits .

Ceylon

iTrader: (3)

Worked on the headlights a bit. Fitted new bushes in the motors, painted the motor housing & headlight frames. Replaced one bump stop that looked a bit past it...Generally just tidying up so they can go on over the weekend .

WP_20140501_17_44_45_Pro by Tom Kinsman, on Flickr

WP_20140501_17_44_51_Pro by Tom Kinsman, on Flickr

WP_20140501_22_06_43_Pro by Tom Kinsman, on Flickr

WP_20140501_22_07_09_Pro by Tom Kinsman, on Flickr

Fitted an auto dimming mirror as I have one in my daily and quite like it - Once you've had an auto dimming mirror there is no going back! .

WP_20140426_13_03_16_Pro by Tom Kinsman, on Flickr

WP_20140426_13_02_36_Pro by Tom Kinsman, on Flickr

WP_20140426_13_02_53_Pro by Tom Kinsman, on Flickr

Ceylon

iTrader: (3)

WP_20140506_21_25_03_Pro by Tom Kinsman, on Flickr

WP_20140506_21_19_18_Pro by Tom Kinsman, on Flickr

Got the battery in the rear bin and wired up, still a few small bits to finish off. All the electrics are working fine. Alarm was a bit of a PITA to sort out as it didn't like being without power for 2 years, all fixed now, though .