3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

wierd nosie

Thread Tools
 
Search this Thread
 
Old Aug 28, 2004 | 02:21 PM
  #1  
moktan_fdtt's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 251
Likes: 0
From: Nor Cal
Unhappy wierd nosie

My fd is making some weird noise, I can't figure out where it is comming from.
It's like a arcking/jittery nosie at a certain rpm, about 2500 or so. I am thinking it might be a vacuum line but I cant tell. I did replace on of the check valve comming from the pressure chamber on the top.
What is it?
thanks
Reply
Old Aug 28, 2004 | 02:32 PM
  #2  
littlemilla3's Avatar
Senior Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2004
Posts: 489
Likes: 1
From: Brea, CA
Tell us more about it. Does it happen every time you reach 2500 rpm? At WOT only? Try to find out where it's coming from.
Reply
Old Aug 28, 2004 | 02:33 PM
  #3  
moktan_fdtt's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 251
Likes: 0
From: Nor Cal
Is it the pre spool actuator?
Reply
Old Aug 28, 2004 | 02:47 PM
  #4  
moktan_fdtt's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2004
Posts: 251
Likes: 0
From: Nor Cal
like a whistling/broken vacumm line nosie. Comming from the turbo/airpump area.
Reply
Old Aug 28, 2004 | 03:11 PM
  #5  
KaiFD3S's Avatar
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
did you just change to open filters or put a downpipe?
Reply
Old Aug 28, 2004 | 03:39 PM
  #6  
speeddemon7's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Jun 2003
Posts: 1,400
Likes: 0
From: colorado
a lose pre spool actuator will rattle like crazy and also your primary boost will suffer.A whistling noise suggests a intercooler coupler may be torn.If the noise is coming from the air pump area my guess is that its the y-pipe coupler.Ive had this happen countless times.Which is why I just finished installing my efini y pipe today.No more coupler to worry about.
Reply
Old Dec 22, 2004 | 01:41 AM
  #7  
Tom93R1's Avatar
gross polluter
Tenured Member: 25 Years
iTrader: (2)
 
Joined: Mar 2001
Posts: 1,757
Likes: 25
From: Chandler, AZ
Originally Posted by speeddemon7
a lose pre spool actuator will rattle like crazy and also your primary boost will suffer.A whistling noise suggests a intercooler coupler may be torn.If the noise is coming from the air pump area my guess is that its the y-pipe coupler.Ive had this happen countless times.Which is why I just finished installing my efini y pipe today.No more coupler to worry about.

Is the pre-spool actuator the one on the y-pipe? I was wondering about that because mine seems loose, when I flick it with my finger it rattles quite a bit. I was looking at that because under boost I get this strange fluttering rattle sound coming from that area and it is pretty damn loud. At first I though it sounded like the turbos themselves having problems but they are way too new to be going out already, plus they boost much to nicely to be getting weak.

I was looking at it and doesnt seem there is a way to tighten anything up on it, iis that just something that needs to be replaced?
thanks
Reply
Old Dec 22, 2004 | 03:14 AM
  #8  
F0RSAKEN's Avatar
Cheese
Tenured Member 05 Years
 
Joined: Aug 2004
Posts: 769
Likes: 0
From: Lynnwood, WA
I occasionally have a weird noise as well, but mine only occurs when the car is cold/er, and goes away after driving a bit. It sounds like buzzing, and it happens right around 2500-3000 rpm, and mainly on deceleration. Any ideas?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
M.C. Language
2nd Generation Specific (1986-1992)
3
Apr 24, 2002 06:58 PM
J-Rat
2nd Generation Specific (1986-1992)
2
Mar 8, 2002 03:39 AM
TainoIndian
3rd Generation Specific (1993-2002)
1
Dec 3, 2001 10:32 AM
Bacon
3rd Generation Specific (1993-2002)
2
Dec 2, 2001 03:03 PM
Mallard Duck
2nd Generation Specific (1986-1992)
2
Nov 30, 2001 07:18 PM




All times are GMT -5. The time now is 10:25 PM.