3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

whats wrong with it?

Thread Tools
 
Search this Thread
 
Old 04-23-03, 11:24 PM
  #1  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
whats wrong with it?

car in high rpm blows smoke out the back has to be oil light blue in color. oil gauge is kind of all over the place? A. bad oil seanding unit B. bad oil metering pump. or C.bad turboes. Any help whould be great thanks.
Old 04-23-03, 11:50 PM
  #2  
official pussy inspector

 
stlFD's Avatar
 
Join Date: Jan 2003
Location: St. Louis
Posts: 109
Likes: 0
Received 0 Likes on 0 Posts
well, I doubt it is your pressure sending unit, as the oil would probably leak on the exterior of the engine if it were this. The turbos will be easy to diagnose. Take off one of the pressurized intake pipes and check for lots of oil. I have no idea how to check if the OMP is bad though. Also, one of the lubricating valves (technical name?) on the rotor housings may be stuck, causing excess oil to enter the combustion chamber. You may want to take suggestions from someone with more advanced troubleshooting knowledge though. Mine are more or less a shot in the dark.
Old 04-24-03, 12:01 AM
  #3  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
not really any oil on the air intakes.
Old 04-24-03, 05:55 PM
  #4  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
any more ideas?
Old 04-25-03, 04:09 PM
  #5  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
bump
Old 04-26-03, 11:17 PM
  #6  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
bumo
Old 04-27-03, 11:37 AM
  #7  
Full Member

 
ShortBusRiot's Avatar
 
Join Date: Jan 2003
Location: away
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
I say get it looked at by a reputable rotary shop. NOT a dealership.
Old 04-27-03, 01:30 PM
  #8  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes on 66 Posts
Oil injectors do no pump enough oil to cause constant smoking. Only bad oil seals, cracks in side housings, or turbos do that. A dealer can check the OMP if they still have the equipment. If plugs are normal, then most likely the turbos. Pull DP and look into turb assemble and the two turbine wheels. If black and wet looking then there it is. Or look for too much oil in IC and such pipes.

A little automotive common sense!
Old 04-27-03, 11:24 PM
  #9  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
thanks for the tips i will look into this thanks.
Old 04-28-03, 07:59 PM
  #10  
Pimpin Rotors...and Hoes

 
badass7's Avatar
 
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes on 0 Posts
Does it smoke at idle in cycles ?? Or any type of constant smoke at idle or at start up ?
Old 04-28-03, 08:26 PM
  #11  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
well i pulled the down pipe does not seem to be any oil but real black carbon but the but there is a little oil driping from the oil feed lines am thinking off pulling the turboes any ways to have them check out this whole thing kind off started when i had them rebult what do you guys think should i just pull them?
Old 04-28-03, 11:33 PM
  #12  
Senior Member

Thread Starter
 
boostedyellow7's Avatar
 
Join Date: Sep 2001
Location: MN
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
badass7 no it does not smoke at startup pretty much 6ooo, and above any more ideas?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
10-29-15 06:47 AM
pfsantos
2nd Generation Specific (1986-1992)
1
09-30-15 01:29 PM



Quick Reply: whats wrong with it?



All times are GMT -5. The time now is 09:42 PM.