Jindi-dog

I have a series 8 FD and wonder what is missing from the front grill opening where there are 3 fixing hole lugs ?




​​​​​​​

gracer7-rx7

iTrader: (16)

I believe it is called an air guide

moconnor

iTrader: (14)

Yup - you can see some pictures here:

https://www.shineautoproject.com/por...-front-bumper/

Ceylon

iTrader: (3)

You need the right clips. 3x NA0150101A

​​​​I assume the front reinforcement is there below?

cewrx7r1

iTrader: (2)

Correct, it is really a plastic support but it is usually removed when going front mount IC.
This is my car with it removed with a home made kit to open the front a little more.

Redbul

iTrader: (26)

There are little wedge shaped decorative pieces that go there on an s8 bumper. I picked up a bunch randomly on a site specializing on selling clips. I will see if I can find for you.

Redbul

iTrader: (26)

Here you go.

Buy a bunch.

hand them out at car meets!

https://www.clipsandfasteners.com/Ma...p-p/a19228.htm

That site has 130 mazda specific clips.

I usually buy a variety of stuff.

Ceylon

iTrader: (3)

Incorrect for S8. The airguide is different and does not go below rebar level.

The PN for the clips is in my post above. That's all he needs if he has an S8.

Redbul

iTrader: (26)

Air guide for S8 is more like a bar.

Silver bumper above is S6/S7.

Interestingly, there is an air dam on S8, that is missing from most cars. Sits behind and below the front lip.

Site does call it a Miata part. But it fits in there on the FD nice and snug.

I have retrieved a clip like that off an S6.

Redbul

iTrader: (26)

NA01-5-101A "Kaba, Guriru" 50-A20 is called "Guido, eah".

moconnor

iTrader: (14)

They are widely available and about $3 each:

https://www.tascaparts.com/oem-parts...ver-na0150101a

Redbul

iTrader: (26)

Mystery Part: 50-732C

Does your car have? It seems like a kind of afterthought addition.

Does not match the FD part style. Likely gets lost when undertray is removed.

Looks like it could be copied by modifying a length of aluminum channel.

Supposed to help with downforce.

(Skaato, Furonto eah damu)

Note: S8 undertray does not have the upper layer like the S6. The tray on my car pictured above is from S6, but with upper portion removed.

There has been some discussion that the upper par of the S6 undertray causes back pressure (and therefore lift).

Redbul

iTrader: (26)

Redbul

iTrader: (26)

The S8 "rebar" seem to have flanges that would line up to the those bumper skin flanges Those clips may therefore have a purpose beyond decoration.

j9fd3s

iTrader: (3)

NA01-50-101A is a Miata part, originally. Also used on the FD
those buyers guides take an average of what a part is and what it fits, and that is what they put in the description.

Ceylon

iTrader: (3)

They secure the lower mouth bumper skin to the lower section of the rebar making it more solid. The late front end is really well braced.