3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Very high idle

Old Jul 24, 2014 | 09:54 PM
  #1  
neuro's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: May 2004
Posts: 151
Likes: 0
From: Boulder, Co
Very high idle

I WENT TO START MY 93 FD this morning, and the RPM went to 4000? So I shut it down.
ANY IDEAS?
Reply
Old Jul 24, 2014 | 10:21 PM
  #2  
IRPerformance's Avatar
Sponsor
iTrader: (41)
 
Joined: Apr 2003
Posts: 11,347
Likes: 321
From: NJ
Stuck throttle cable or big vacuum leak most likely. I've also had cruise control cables stick.
Reply
Old Jul 27, 2014 | 02:28 AM
  #3  
Dowah's Avatar
Junior Member
 
Joined: Aug 2011
Posts: 21
Likes: 0
From: Sweden
Check the throttle so that it's not stuck. Mine got a bit corroded from being stationary for a few months and would not return once opened. Hade to take it out and clean it up.
Reply
Old Jul 27, 2014 | 12:31 PM
  #4  
cptpain's Avatar
Torqueless Wonder
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2004
Posts: 2,020
Likes: 3
From: Texas
Sounds like you still have the AWS working, but that takes RPM's to 3000.
Reply
Old Jul 27, 2014 | 12:58 PM
  #5  
7speed's Avatar
bcrotary.
Tenured Member 05 Years
 
Joined: Jul 2010
Posts: 513
Likes: 1
From: Abbotsford, British Columbia
I'm having the same problem.
Reply
Old Jul 27, 2014 | 12:58 PM
  #6  
hairball's Avatar
Full Member
iTrader: (8)
 
Joined: Mar 2013
Posts: 68
Likes: 0
From: texas
Sounds like vacuum leak check aws hose for cracks or carb cleaner and spray it where gaskets are to find leak idle will rise if it sucks any in needs to be running to do this though
Reply
Old Jul 29, 2014 | 08:36 PM
  #7  
Mitchocalypse's Avatar
Brap..
iTrader: (2)
 
Joined: Jul 2010
Posts: 449
Likes: 1
From: Alberta, Canada
Another thing to check, make sure the dashpot is set correctly. If not it can hold the throttle open way too far. Happened to me a while ago.

If you don't know what that is just search around
Reply
Old Jul 30, 2014 | 01:35 PM
  #8  
wstrohm's Avatar
Recovering Miataholic
Tenured Member: 20 Years
 
Joined: Mar 2002
Posts: 1,561
Likes: 50
From: Fountain Valley, CA
I had to replace the fiberboard gasket between the LIM and the rotor housing with the later stainless steel gasket, which cured our high idle problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
gxl90rx7
Haltech Forum
4
Sep 14, 2015 03:09 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:58 PM.