ultimate fuel system from rx7store
12-22-07, 07:15 PM
#1
Rotor or no motor
Thread Starter
iTrader: (24)
ultimate fuel system from rx7store
hey guys
i just received the ultimate fuel system from rx7store and i was looking for installation instructions.
whats the ACV valve i have to eliminate for this kit and where is it?
pictures will be really helpful.
or if anyone knows any link with more info,
Thank you
Con
i just received the ultimate fuel system from rx7store and i was looking for installation instructions.
whats the ACV valve i have to eliminate for this kit and where is it?
pictures will be really helpful.
or if anyone knows any link with more info,
Thank you
Con
12-23-07, 12:23 AM
#2
Original Gangster/Rotary!
iTrader: (213)
No offense, but you might want to consider having it professionally installed.
Fuel system+amateur install=fire, more often then not.
The ACV is located on the driver's side of the LIM, above the stock secondary fuel rail.
Fuel system+amateur install=fire, more often then not.
The ACV is located on the driver's side of the LIM, above the stock secondary fuel rail.
12-23-07, 07:11 AM
#3
12-23-07, 09:57 AM
#8
Original Gangster/Rotary!
iTrader: (213)
If you need somebody to hold your hand through this, how do you expect to complete something as complicated as a fuel system install with zero defects? Not trying to be a jerk ( 
), but I've seen at least four FDs burn down under similar circumstance.
), but I've seen at least four FDs burn down under similar circumstance.
12-23-07, 10:53 AM
#9
Rotor or no motor
Thread Starter
iTrader: (24)
you dont sound like a jerk even if your words frustrate me a bit
you want me to keep my fd safe. Yes i do have the airpump..
12-23-07, 11:01 AM
#11
Banned. I got OWNED!!!
Join Date: Sep 2003
Location: new jersey
Posts: 2,030
Likes: 0
Received 0 Likes
on
0 Posts
rich, why r u making it ur problem u told him the consequences already. everyone has to start somewhere and learn from mistakes
I can tell you that I wouldnt want to learn from my experiences if that happened
12-23-07, 11:29 AM
#13
12-23-07, 11:34 AM
#14
Original Gangster/Rotary!
iTrader: (213)
I post to help out forum members, share what i've learned the hard way, and make the community a better place.
If you can't understand that, I don't know what to tell you.
And con, I answered your question in my first post in this thread. What else do you need?
12-23-07, 11:38 AM
#15
Rotor or no motor
Thread Starter
iTrader: (24)
wan, let me spell it out for you---
I post to help out forum members, share what i've learned the hard way, and make the community a better place.
If you can't understand that, I don't know what to tell you.
And con, I answered your question in my first post in this thread. What else do you need?
I post to help out forum members, share what i've learned the hard way, and make the community a better place.
If you can't understand that, I don't know what to tell you.
And con, I answered your question in my first post in this thread. What else do you need?
12-23-07, 11:45 AM
#19
Rotor or no motor
Thread Starter
iTrader: (24)
merry xmas to you too man. all the best.
i wont start the setup now, it will take time due to the fact that im out of the country + my turbos are not there yet. i wanted to see what i will need,
Thanks
i wont start the setup now, it will take time due to the fact that im out of the country + my turbos are not there yet. i wanted to see what i will need,
Thanks
12-23-07, 12:46 PM
#20
Banned. I got OWNED!!!
Join Date: Sep 2003
Location: new jersey
Posts: 2,030
Likes: 0
Received 0 Likes
on
0 Posts
wan, let me spell it out for you---
I post to help out forum members, share what i've learned the hard way, and make the community a better place.
If you can't understand that, I don't know what to tell you.
And con, I answered your question in my first post in this thread. What else do you need?
I post to help out forum members, share what i've learned the hard way, and make the community a better place.
If you can't understand that, I don't know what to tell you.
And con, I answered your question in my first post in this thread. What else do you need?
yes u r here to help but NOT TO FORCE AN ISSUE. U should look how alot of ur post seem. EVEN if he didnt understand, i don't think the next thing to do is to tell him to seek a professional. i always thought the forum was here to help, not to suggest to get help from a professional. then what is the forum for!
good luck to the thread starter and if u do complete this urself carry an extinguisher just in case.
Last edited by njstreetrx7; 12-23-07 at 01:11 PM.
12-23-07, 02:06 PM
#22
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
FIRST, what do u mean "spell it out for me". what are tryna get at? this is the net EVERYTHING IS SPELLED OUT!
yes u r here to help but NOT TO FORCE AN ISSUE. U should look how alot of ur post seem. EVEN if he didnt understand, i don't think the next thing to do is to tell him to seek a professional. i always thought the forum was here to help, not to suggest to get help from a professional. then what is the forum for!
good luck to the thread starter and if u do complete this urself carry an extinguisher just in case.
yes u r here to help but NOT TO FORCE AN ISSUE. U should look how alot of ur post seem. EVEN if he didnt understand, i don't think the next thing to do is to tell him to seek a professional. i always thought the forum was here to help, not to suggest to get help from a professional. then what is the forum for!
good luck to the thread starter and if u do complete this urself carry an extinguisher just in case.
What's with all the animosity...
I thought you and Goodfella were friends 
