I just did the turbo simplification on my car with the block of plates . Now i get like 3 psi of boost .Can some one help me out with some info ?
Thanks Dan

 

..,,,..,

 

Has enyone don this to there car ???

 

Can you give any other info??? Can you hear a rush of air? Have you been thru all the line a 2nd time to double check? Its hard to say without knowing what all is done. I'm leaning towards a IC pipe leak. I know it sounds trivial but it happends alot when people are pulling those pipes in and out. I'd recheck all you IC pipes by taking them apart and back together then make sure they are nice and tight.

Did you hook the little vacume line back up to the bov and crv? If not they would leak the boost out. Make sure all your block off plates are sealed.

I dont know man, I'm just throwing things out there, can you give some more info? Does it ever go above 3psi? Any weird sounds or rush of air

Later,
STEPHEN

 

Ok I went thru all the lines like 4 times .The fifth time I lookt at the plugs that go in the solenoids and they were backwards . So I finally fixt it !
Thanks 4 all your help
Dan

 

5th times the charm. Glad it's working now.