trying to get to 500hp
Water doesn't effectively change your AFR's......to a point. It is not a fuel. I say to a point because there is a threshold at which it will slightly richen AFR's. However, this shouldn't be a factor in your case.
With this, when you add water only, you do reduce power. Depending on how much will depend on the affects of the system. Running more will just compound its effects. Reduce knock more, pull more heat, and you will make less power. This is where turning up the boost regains the lost power, and then some.
In my opinion, if you are only running to reduce detonation and cooling temps, a simple switched 315cc nozzle would be fine. I would also recommend a post turbo injecting location.
With this, when you add water only, you do reduce power. Depending on how much will depend on the affects of the system. Running more will just compound its effects. Reduce knock more, pull more heat, and you will make less power. This is where turning up the boost regains the lost power, and then some.
In my opinion, if you are only running to reduce detonation and cooling temps, a simple switched 315cc nozzle would be fine. I would also recommend a post turbo injecting location.
well right now i have the injector facing the throttle body....but would i lose alot of power or a little not that it matters i just want a long lived engine but if its cooling the engine shouldnt that make it faster? i posted a pic so you can see where the injector is

id like you guys to welcome me to the 500hp club make that 531hp
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid25.photobucket.com %2Falbums%2Fc92%2Fbuffhulk%2FE5048B3E-CA49-4858-AC4B-77D4207B4A98-17500-000009094838AD74.mp4">
Last edited by buffrx7; Dec 7, 2012 at 08:18 PM. Reason: wrong pic
Well my car moves way faster but the sputtering made it slow it was a fouled out spark plug..... And those Nismo 370z are pretty quick even more so with all the bolt on he has on top of that my car with the messed up spark plug is still faster then yours lmfao
At 405whp, with spark blow-out above 7krpms, I was running dead even with a 600whp Mach1 while doing highway pulls.
Running a legit 500+whp should put you WELL above any N/A Z... We are talking about a 3,340lb Nissan with 350hp at the crank, right? I don't see some bolt ons giving that car enough of a boost to run even with a 500whp FD.
But I obviously don't know all the specifics of the individual car in question.
That's a bit presumptuous...
At 405whp, with spark blow-out above 7krpms, I was running dead even with a 600whp Mach1 while doing highway pulls.
Running a legit 500+whp should put you WELL above any N/A Z... We are talking about a 3,340lb Nissan with 350hp at the crank, right? I don't see some bolt ons giving that car enough of a boost to run even with a 500whp FD.
But I obviously don't know all the specifics of the individual car in question.
At 405whp, with spark blow-out above 7krpms, I was running dead even with a 600whp Mach1 while doing highway pulls.
Running a legit 500+whp should put you WELL above any N/A Z... We are talking about a 3,340lb Nissan with 350hp at the crank, right? I don't see some bolt ons giving that car enough of a boost to run even with a 500whp FD.
But I obviously don't know all the specifics of the individual car in question.
thanks and i was joking about the me beating him with a messed up spark plug its was a joke didnt think people would comment about it like i was being for real
also cant race like crazy on that road to much traffic...i have a decent size turbo so it takes a sec to build boost but once it does im gone...remember all motor power is there always so took me a sec to build boost even with the fouled plug and the sputtering
also cant race like crazy on that road to much traffic...i have a decent size turbo so it takes a sec to build boost but once it does im gone...remember all motor power is there always so took me a sec to build boost even with the fouled plug and the sputtering
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
Crazy_Jake
3rd Generation Specific (1993-2002)
16
Dec 23, 2005 11:12 AM







