rescueranger

iTrader: (15)

where can i get this tool? or is there any way to remove the counterweight nut without it?

rescueranger

iTrader: (15)

picture

IRPerformance

iTrader: (41)

Bolt the flywheel back to the counterweight and get a flywheel stopper from somewhere like Pineapple racing.

NoPis10

iTrader: (29)

The socket size needed is 2 1/8" which can be picked up at Sears.
Like mentioned above.. buy a flywheel stopper and the socket with a good impact gun and out she'll come...

L8R

MOBEONER

iTrader: (18)

racing beat sells one also.

AzEKnightz

iTrader: (24)

there you go, just did a search for you and they are cheap, 23 bux =D

http://www.mazdatrix.com/toolmisc.htm

I just recently bought one because I cant the get front e-shaft off with my impact gun with this and a breaker bar + extension, it came out like a cake =D.

Good luck hope this helps.

-AzEKnightz

rescueranger

iTrader: (15)

yup thanks

jhcrazyboi

iTrader: (7)

i just use a 55mm socket and my impact gun to shoot it off i didnt need the flywheel stopper tool.