Stock y-pipe o ring gasket.
#1
Powered by** Rotary
Thread Starter
Stock y-pipe o ring gasket.
Does anyone know the size of this thing or where can I get it. I don't want to go to a dealer cause i'll know they'll charge me a lot and plus it'll probably have to be ordered.
I'm talking about O ring that sits inside of the y-pipe between 2nd turbo and first one.
Thanks a lot.
Amel
I'm talking about O ring that sits inside of the y-pipe between 2nd turbo and first one.
Thanks a lot.
Amel
#4
I AM A THIEF - READ GOOD GUY / BAD GUY
Join Date: Sep 2003
Location: Chattanooga, TN
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
uhh, if you dont have a daily driver...go to autozone or someplace and take it off the car, walk in and say "hey ****, I need a new one of these" JK, but basically.
Sean
Sean
#6
I AM A THIEF - READ GOOD GUY / BAD GUY
Join Date: Sep 2003
Location: Chattanooga, TN
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
as long as its the same size, I dont see a problem...and auto zone or big parts store should have o-rings...but not sure, I have been there for everything else and hevent needed that piece yet.
Trending Topics
#8
Rotary Freak
iTrader: (8)
Does anyone have the dimensions, so I can order a couple from the McMaster-Carr catalog ?
I'd like to get a couple of them, including some square-section o-rings.
I had a fairly new one (6-months old) start leaking at the track this weekend when running 15-psi of boost.
:-) neil
I'd like to get a couple of them, including some square-section o-rings.
I had a fairly new one (6-months old) start leaking at the track this weekend when running 15-psi of boost.
:-) neil
Last edited by M104-AMG; 04-10-06 at 08:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM