3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Smoke on decel??

Thread Tools
 
Search this Thread
 
Old Nov 24, 2007 | 11:37 PM
  #1  
grimple1's Avatar
Thread Starter
Turd Ferguson
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2006
Posts: 2,047
Likes: 2
From: Sherman Oaks, California
Angry Smoke on decel??

Got a bit of a problem and am trying to get it sorted out. The car smokes a lot when coming off deceleration. I thought it was faulty turbo seals as there seemed to be an unruly amount of oil in the ic piping...so I purchased a new Aspec GT3574 to remedy the problem. Got the turbo on this morning and got all the fittings on it, but the RX still smokes a lot on decel. The car hasn't been boosted above 5k rpms (and only about 5psi), and has only been babied since rebuild.

Some other info:
The engine has less than 3000 miles on it (with new plugs). Probably closer to 1500.
Smokes even turbo is uncoupled from ic piping and is venting to open atmosphere.
1300cc injectors
Midpipe, downpipe, stock exhaust
PFC

No smoke at idle.

Any ideas?
Reply
Old Nov 25, 2007 | 12:27 AM
  #2  
mono4lamar's Avatar
In the burnout box...
Tenured Member 10 Years
iTrader: (32)
 
Joined: Oct 2003
Posts: 4,453
Likes: 2
From: New York
Check to make sure the PCV valve isn't in backwards... Taking it off, capping the UIM and running catch can for the filler neck solved my problems. Single turbo's have this problem often.
Reply
Old Nov 25, 2007 | 12:41 AM
  #3  
grimple1's Avatar
Thread Starter
Turd Ferguson
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2006
Posts: 2,047
Likes: 2
From: Sherman Oaks, California
yeah i read your postings that you had with a similar issue. I'll take a look at it tomorrow in the light. I appreciate your help, mono4lamar.


anyone else?
Reply
Old Nov 25, 2007 | 01:04 AM
  #4  
jiggaFlexxx's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 87
Likes: 1
From: Jamaica/Miami
Maybe too much oil pressure for the turbo. Check to make sure you have a oil restrictor pill for the turbo oil inlet.
Reply
Old Nov 25, 2007 | 01:16 AM
  #5  
grimple1's Avatar
Thread Starter
Turd Ferguson
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jul 2006
Posts: 2,047
Likes: 2
From: Sherman Oaks, California
there's no restrictor pill in it. Aspec guys seemed to think it didn't need it. It's just straight -4an...or whatever the sizing is.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM
mulcryant
General Rotary Tech Support
5
Oct 4, 2015 12:18 AM
rx7inoregon
Old School and Other Rotary
5
Oct 1, 2015 12:44 PM
frosty1993
General Rotary Tech Support
3
Sep 30, 2015 01:27 PM
dexter snoek
New Member RX-7 Technical
4
Sep 29, 2015 09:18 AM




All times are GMT -5. The time now is 05:58 AM.