Hi ya'll. I just installed my Coolingmist W/I kit. I verified that it works and I'm happy with it. Now here's my question, I'm trying to install a LED light that I want to illuminate when I'm spraying, do I tap into the no.3 side of the boost switch and to ground or somewhere else? Any help would be appreciated. Thanks in advance guys.

 

Just tap into the switched power side of the pump, and to ground, at least thats the way I would do it. So when the pump recieves power to turn on, it will feed your led light power as well. Terminal 87 on your relay....

 

After reading the schematic, it does makes sense to tap into terminal 87. Thanks alot for the info.

 

No problem, glad to help. what boost and rpm are you having it inject at, and what size jet did you use?

 

I got the single stage kit and the boost switch is set at 10 psi, I didn't know that I could set it with rpm's too. The jet size is whatever came with the kit. The person that I talked to in Coolingmist, I think his name is (Bryan?), he's the owner, said that he'll send me the right nozzle size after I told him my HP.

 

Cool, no you cant set it via rpm, only boost, but was wondering when it came on for you as far as rpm's ( as boost comes on at different rpms with different setups) Cool, have fun.

 

Thanks again bro for the help.

 

You can do it super pimp like Trevor and Jarret did for my ride =) My A/C LED illuminates when it's spraying. It's pretty clean and original. But that LED sure gave Jarret hell! LOL

 

I bet it did! Thanks though, but I think I'll stick to a simple LED light on the shift column