Alright, I've got everything connected as seen in this pic, but I've got one last question. In the thread where I got the pic from, Rynberg said to plug the original actuator vacuum line and also the unused nipple on the actuator. In this pic where it has the com line hooked up to the wastegate actuator, is that the actuator he's talking about? Now that I've typed that out, it sounds kind of dumb, but I just wanted to make sure. So I remove the other line that's on there, plug that nipple on the actuator, and plug where the hose goes as well?

 

Damn, Tyler has nice turbos...

 

Well that helps. :-p

 

I'm sorry, just couldn't help but notice those clean bastards.

 

Yes. Plug the other WG actuator nipple.

 

Okay, I capped the WG actuator nipple and plugged the line that was attached to it. Btw, what was that line for?

 

Did you connect to the "NC" or "NO" port? It looks like your photo is labeled "NC". I'm installing mine this weekend and I thought we were supposed to use the "NO" port. Is your setup working yet? thanks-bill

 

The line goes to the stock wastegate actuator solenoid. You are removing it from doing its job but it needs to be blocked off.