problems with rx7 store fuel ultimate system
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: oakland ca
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
problems with rx7 store fuel ultimate system
recently bought the ultimate fuel system from the rx7.com and the primary fuel rail is leaking big time. I checked the fuel injecters and o rings about 10 times trying to figure out what is wrong and everything on the injecter side is ok ..i adjusted the the rail as low as i can go and made sure everything is tight and it still is leaking big time. I think the rail is defaulty and i am stuck...anyone else have problems with this fuel system? do i need to go out and get bigger o rings?
#5
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Something like this would be simple to determine what is causing the leak and where it is.
Seperate the rail from the LIM so it just hangs there in the air, turn the ignition key to on, go to the Diagnostic terminal and activate the pump. So simple to find the leak.
That is if it is really there and not somewhere else. Time to step up and be a mechanic.
Seperate the rail from the LIM so it just hangs there in the air, turn the ignition key to on, go to the Diagnostic terminal and activate the pump. So simple to find the leak.
That is if it is really there and not somewhere else. Time to step up and be a mechanic.
#6
Where has my $ gone?
iTrader: (12)
Join Date: Feb 2004
Location: Bay Area, Cal/Phoenix, AZ
Posts: 1,654
Likes: 0
Received 7 Likes
on
2 Posts
Something like this would be simple to determine what is causing the leak and where it is.
Seperate the rail from the LIM so it just hangs there in the air, turn the ignition key to on, go to the Diagnostic terminal and activate the pump. So simple to find the leak.
That is if it is really there and not somewhere else. Time to step up and be a mechanic.
Seperate the rail from the LIM so it just hangs there in the air, turn the ignition key to on, go to the Diagnostic terminal and activate the pump. So simple to find the leak.
That is if it is really there and not somewhere else. Time to step up and be a mechanic.
Trending Topics
#8
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Instead of UIM it should have been center housing.
My way you could see if the fuel is coming from the FPD, out of the injector tips, or inlet/outlet hoses, or around the inj O rings. It alloes you to see every angle of the unit.
Weird but correct.
My way you could see if the fuel is coming from the FPD, out of the injector tips, or inlet/outlet hoses, or around the inj O rings. It alloes you to see every angle of the unit.
Weird but correct.
Thread
Thread Starter
Forum
Replies
Last Post