Hello i buy a new baterry harness and im having troubles to fin the right fitment for it, also i dont know where attach for example the Gound wire i dont know if attach to the motor or to the engine bay.
And also im having trouble to route the exact way.

 

The ground wire goes to the block. Routing should be pretty straight forward with it in all honesty, hook the starter wires in place first and you should see the tab that anchors the harness to the long trans bolt that goes thru the starter. Once that is in place it should pretty much lay in place.

 

Yes today i was doing that and i was able to install the harness the thing is that i dont know if i choose the perfect hole on the engine to attach the ground cause it get in the way of the spark plugs and i really dont remenber if that was the original position.
if someone can snap a pic i will apreciate i will browse anyway here to se if i find a good pic

 

Actually the battery ground should go to both the chassis and engine for best operation.

 

If the ground is in the way of the spark plugs then you are too high.

It needs to be lower, near the block coolant plug.

 

will put it near the coolant plug holes.
thanks for the help guys