Please help. I noobed while pulling whole front end
Hey guys. I am swapping the drive train from one wrecked fd to a decent shell. I removed the whole front end with engine and tranny as a unit. I thought I disconnected everything but I forgot one that was in the back of engine/tranny area. It snapped and now I need to replace it. It smells like coolant but why would coolant be goin to the tranny? It's a rubber hose and I need help finding the part number. Just looking to learn and for some help at the same time. Thank you for your help.
-Jon
-Jon
That's where it goes yes but I didnt brake the nipple. I just need the hose. And my Ipad won't let me post pics
it's only about 1' long. I want to know if there's anyway to fix it or if I'd have to get an oem one
it's only about 1' long. I want to know if there's anyway to fix it or if I'd have to get an oem one
Trending Topics
That's the clutch hydraulic line. Just get a new braided stainless line -
http://www.corksport.com/corksport-s...for-rx7-1.html
$18 and problem solved. It's also an upgrade and a necessity if you run a heavier clutch.
Dale
http://www.corksport.com/corksport-s...for-rx7-1.html
$18 and problem solved. It's also an upgrade and a necessity if you run a heavier clutch.
Dale
Wholly ****. Never have seen that site before. Thank you. Are there part numbers as well? Thank you as well dale. Appreciate the help with the noobie questions. Why Danny? Also sorry turbojeff. I thought you were referring to the throttle lines near the ground
Last edited by MoePwr; Mar 27, 2012 at 08:06 PM.
Dont worry about taking a day off, but you better let me know by friday because if I dont know Im going to assume you cant and Im going to start drinking once I get off work at 9am to celebrate being a god damn american!
sorry for hijacking your thread, ill stop posting, just text me if you need any help this weekend man.
sorry for hijacking your thread, ill stop posting, just text me if you need any help this weekend man.
Thread
Thread Starter
Forum
Replies
Last Post









