pills!!
#1
Senior Member
Thread Starter
pills!!
alright, i searched...and found how to replace them...and how to make your own...but i dont know where to buy stock pills? or the holly jets that people talk about? i made my own pills (they were too big) but i got my boost to go up to 9lbs, from 7 without the pills. just need to know where/part numbers for the stock pills or stock sizes. thanks!
btw thanks for pointing me in the right direction mahjik!
btw thanks for pointing me in the right direction mahjik!
#2
Rotary Freak
Make your own ,the stock size is , I think .059 for one .061 for the other. Use wire size drills as you know . What line does each go in ? I do not remember, sorry. I think the hole size is correct. I could be wrong
#3
Here is a pic of the lines that have the pills from Disney's website:
I think if you order these two hoses they come with the pills installed. Just make sure the dealer knows that they are for a '93. The later models had the restriction built into the compressor housing outlets. You can also use carb jets that have the right size hole. Pettit used to send them with their downpipes to keep the turbos from overboosting. I assume they still do.
I think if you order these two hoses they come with the pills installed. Just make sure the dealer knows that they are for a '93. The later models had the restriction built into the compressor housing outlets. You can also use carb jets that have the right size hole. Pettit used to send them with their downpipes to keep the turbos from overboosting. I assume they still do.
#7
Originally posted by racerfoo
if i am runnin non-seq...would i want both pills to be the same size?
if i am runnin non-seq...would i want both pills to be the same size?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
RX7s
3rd Generation Specific (1993-2002)
5
04-02-02 01:45 AM
Toadman
3rd Generation Specific (1993-2002)
5
04-01-02 04:22 PM
gorockrx
2nd Generation Specific (1986-1992)
15
03-06-02 10:11 PM
rotorhead46
2nd Generation Specific (1986-1992)
2
01-07-02 10:30 AM