Only two FD sub enclosure kits left!
#1
Lives on the Forum
Thread Starter
Only two FD sub enclosure kits left!
Alright, there are only two left. First to PayPal $95 to bottorf25@aol.com gets it shipped to them. Sealed enclosure holds one 10" woofer and allows use of the cargo divider as well as access to the spare without removal. This is a kit of computer cut wood only, you assemble it yourself in 1-2 hours. Search the other threads for more info.
There continues to be a lot of response on these. If enough people will commit again I would consider another run in the future. About half the people who insisted they were interested backed out when it came time to collect money. To those waiting: the enclosures should ship tomorrow. I apologize for the delay and I much appreciate your patience.
installed pics
There continues to be a lot of response on these. If enough people will commit again I would consider another run in the future. About half the people who insisted they were interested backed out when it came time to collect money. To those waiting: the enclosures should ship tomorrow. I apologize for the delay and I much appreciate your patience.
installed pics
#4
Speed Mach Go Go Go
iTrader: (2)
Join Date: Oct 2001
Location: My 350Z Roadster kicks my RX7's butt
Posts: 4,772
Likes: 0
Received 2 Likes
on
2 Posts
Some assebly required?
So i'd have to glue it and carpet it myself?
Does it come with cut pieces of carpet?
Is the hight an exact fit? ...my amp is there with raised floor.
Could you make one to fit 3ea 8" JL's?
(Would be nice to have a spre tire)
I just tried that e-mail and it bounced back?
Does it come with cut pieces of carpet?
Is the hight an exact fit? ...my amp is there with raised floor.
Could you make one to fit 3ea 8" JL's?
(Would be nice to have a spre tire)
I just tried that e-mail and it bounced back?
#7
Full Member
Join Date: Apr 2001
Location: Fairfax Station, VA, USA
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I was also wondering if you could make one custom for me that held two 10" woofers, evenly spaced. Obviously since its a special order it would be more expensive. So get back to me if that is doable. Thanks.
Spyder420
01 MR2 Spyder for sale!
Spyder420
01 MR2 Spyder for sale!
Trending Topics
#8
Lives on the Forum
Thread Starter
Thanks for the responses, guys. For the record, all the kits are paid for and shipped; sold out. If another group of at least 6 steps up we could run them again. This first run ended up with 10 buyers; this after having over 20 who insisted to me they would buy one. That was about what I expected but it was a chore to answer all the questions and then keep up with who was in/out on a daily basis. That is why I will have to stick with pre-pay again in the future.
I have not yet received any stories of anyone's package arriving in pieces, so I am hoping our luck continues to hold out Making it to Alaska is good news. Thanks for all the positive comments from everyone who has gotten theirs.
I have also received a lot of inquiries about "custom" setups. I would be happy to correspond with you guys, but am sorry to say I can't make your wishes come true. The key to the kit is that it is mass produced and a "one off" although not difficult at all would be much more expensive since it would not be made in volume.
I will once again post the link to the pics. Again, going rate is $80 +shipping and this is precut wood ONLY. You glue it together, cover it and install your woofer. It will hold nothing larger than a 10" driver and allows use of the cargo divider and full spare access without removing the enclosure. FD sub enclosure pics
Happy Listening
I have not yet received any stories of anyone's package arriving in pieces, so I am hoping our luck continues to hold out Making it to Alaska is good news. Thanks for all the positive comments from everyone who has gotten theirs.
I have also received a lot of inquiries about "custom" setups. I would be happy to correspond with you guys, but am sorry to say I can't make your wishes come true. The key to the kit is that it is mass produced and a "one off" although not difficult at all would be much more expensive since it would not be made in volume.
I will once again post the link to the pics. Again, going rate is $80 +shipping and this is precut wood ONLY. You glue it together, cover it and install your woofer. It will hold nothing larger than a 10" driver and allows use of the cargo divider and full spare access without removing the enclosure. FD sub enclosure pics
Happy Listening
#9
Lives on the Forum
Thread Starter
Christ I mis-typed my own email. Sorry guys. Get me here: bottorff25@aol.com
#10
well if anyone need custom boxes for a rx a friend of mine owns a car audio shop and can make boxes for a FD useing mine to see if it will fit i am planning on going 3 8" subs which should not be a problem if you are interested he can to the box and speakers and anything else you need if you live in the dfw area he can do what every you want to it just give me a e-amil dasha1@airmail.net
Thread
Thread Starter
Forum
Replies
Last Post