is there any way to hook up a pda to a 3rd gen? somebody told me pocketlogger.com that they only hav set ups for 1 and 2gen rx7's...how do you guys monitor things that a pocket logger allows? and how do you tune ur 3rd gens? sorry this may seem like a dumb question im still a noob dont bash too hard

 

I've never heard of anyone using a PDA on a 3rd gen. The most common tool for tuning seems to be the Apexi Power FC.

 

Get a datalogit and a techedge wideband. You will need a computer to log the information too. You can hook all that up to a Power FC ECU. If you don't have a clue, you might want to be very careful about tuning the car yourself.

 

The stock ECU can't be tuned. Most of the aftermarket programmable ECU's have a monitor that can be purchased along side the ECU.

 

I think you can only do that with cars equipped with the OBDII system. I think that applies to all cars after 96. Something like that. So in other words, you cant do that with any RX-7.

 

In the past forum members were able to hookup their PDA to their Haltech e6k system. THey were able to tune and monitor through the PDA.

 

You sound like a DSM owner. No, you can't monitor your ECU with the pocketlogger. It's only designed for the 1st generations DSM's and most OBD-II vehicles.

 

Sorry I got confused with pocketdos. Below is the link to members who has been successful in using their compaq Ipaq+pocketdos+E6k.


https://www.rx7club.com/forum/showth...threadid=77844

 

they have dataloggers for the 1g dsm and 1 and 2gen rx7 (obd1)

 

http://www.pocketlogger.com

rx7 1g dsm obd2

 

I don't see a datalogger for an RX-7 there.

 

right next to obd 2

 

my bad my friend told me they hav the datalogging but the rx7 is the ecu upgrade...

 

the rx7 version is pretty new, pocketloggers are awesome little devices.. 150$ gets you total access to every paramater the ecu sees. between that and dsmlink, we have it good in diamond star land as far as tuning is concerned