Hi there getting my motor rebuilt & going single wanted to change my motor mounts what do u guys recommend thanks

 

Well...some people say to go with alternative materials but I've always heard that just brand new OEM mounts will get the job done for most setups...thats what Im going with on my setup and I have a cosmos 13B with large street ports going in as well as a single turbo setup...

 

Thanks, would like some more input if possible Thanks

 

what kind of driving are you going to be doing?

 

i ended up regretting going with factory motor mounts and upgraded to poly urethane. i do a lot of spirited driving in my car, and the little bit of extra vibration is way worth it.

 

Poly mounts http://www.banzai-racing.com/polyfd_motor_mounts.htm

 

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/replacing-engine-mounts-809217/

 

+1 for the poly mounts. so much more solid than before... granted i had two bad stock mounts at only 65,000 miles. you'll find more creaking old plastic parts, but these fd's are just old cars. now i question my differential mounts. probably throw some poly in there too i went with rotorsport racing's mounts.