I SEARCHED

I need a ton of help from any one that has gone through the "non-seq conversion" by Scuderia Ciriani, this one http://www.scuderiaciriani.com/rx7/n...ntial.html#NON
i have a bunch of Q's, i have e-mailed the site maker dozens of times, but i never get one resonse back. If i could get a forum member's AIM name to help me with these Q's, it would make things quicker and easier than posting in this thread.
if at all any of you are willing to help...

Jason

 

.....?

 

isnt that site like 8 years old now? i dont think that guy has an rx7 anymore.

post your questions here.

 

1st i have nooooo idea what so ever what all these block off plates are for
2nd i have no idea what to tell my buddys dad thats a machinist to do to the waste gate
3rd i have no idea what vacuum lines on the solinoids need to be blocked off and what else needs to be blocked off
4th i need to know what i need to weld if you have pic's

i was poor mans non seq for while and i love it so i decided to go full non seq while i have the engine out of the car (right now)

 

I've got some pictures that may help on my site:

http://homepage.mac.com/flobs/PhotoAlbum19.html

Do a search for a non-seq diagram - then just get rid of all the solenoids!

HTH

 

The site has been around for a while, but Steve still has an RX-7. He's also on the forum:

https://www.rx7club.com/members/milesbfree-2694/

but is extremely busy so he has little time for internet stuff these days.

 

THANK YOU SO MUCH YOU HAVE NOOOOOOOOO IDEA HOW MUCH THIS IS HELPING ME
AGIAN THANK YOU SOO MUCH

 

hrmmm i cant find about the soliniods and i found little about the blokc off plates to me it seems like most of the stuff can be welded shut insted of using plates...am i right?