3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need a bit of Info

Old Jan 11, 2006 | 05:21 PM
  #1  
Justin93_rx7's Avatar
Thread Starter
Newbie
 
Joined: Jan 2006
Posts: 4
Likes: 0
From: West Virginia
Need a bit of Info

Hey guys my rx7 is an automatic i know thats not the best thing to have when your wanting to go fast but i was wondering if anyone could tell me any tricks that they might now about how i can get a better shot off the line? my mods are 3" exaust from the turbo back short ram intake and a breather. Any information would be greatly appreciated.
Reply
Old Jan 11, 2006 | 05:33 PM
  #2  
dgeesaman's Avatar
Moderator
Tenured Member: 20 Years
Liked
Loved
iTrader: (8)
 
Joined: May 2002
Posts: 12,313
Likes: 27
From: Hershey PA
1) Learn to launch the car. Start by running a search on 'hold button'
2) You're not going to be able to mod an auto much more than that without doing some serious mod gymnastics. In fact, you may already be overdriving your ECU. If you're talking about adding power, we need to know 2 things:
A) The 3" exhaust - is there any catalytic converter in there?
B) Do you have a boost gauge, and if so, what is the boost pattern?

Dave

Last edited by dgeesaman; Jan 11, 2006 at 06:06 PM.
Reply
Old Jan 11, 2006 | 05:36 PM
  #3  
point5chink's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2005
Posts: 324
Likes: 0
From: Kirkland, WA
torque brake: hold the brake down with your left foot, press the gas to put load on the torque converter, let off brake and smash gas more...or buy a stall converter.
Reply
Old Jan 16, 2006 | 06:05 PM
  #4  
dave5678's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2005
Posts: 73
Likes: 0
From: Germany
I have an auto also but when I hold the break and push the gas the car only lets me go to like 2800 and it feels the same as if I didnt even do that. Of course thats in first with hold on. Should I just get a stall converter like you said?
Reply
Old Jan 17, 2006 | 12:04 AM
  #5  
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 1,083
Likes: 4
From: california
check out my sig below!. my car is also an auto and the best thing to do is add 4.33 rear end gears . this will make the car respond so much better. make sure you have a boost gauge and keep the boost at 10 psi on the stock ECU so you don't pop the motor. take care of all the reliability mods and have the car inspected by a rotary shop. don't use the launch techniques too much as the stock trans will not hold up long to the abuse its not designed for racing. if you want to race sell the auto FD and buy a manual FD. the mods I have done are working out well for me since the car is only used for pleasure driving and personal enjoyment. Good luck with the car and feel free to PM me with any questions about the auto's
Jeff
Reply
Old Jan 17, 2006 | 03:21 AM
  #6  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
Originally Posted by point5chink
torque brake: hold the brake down with your left foot, press the gas to put load on the torque converter, let off brake and smash gas more...or buy a stall converter.
It will help you torque brake if you pull the ABS fuse.
Reply
Old Jan 17, 2006 | 05:09 AM
  #7  
dave5678's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2005
Posts: 73
Likes: 0
From: Germany
So if I pull the fuse it will go higher then 2800-3k rpms?
Reply
Old Jan 17, 2006 | 08:39 AM
  #8  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
I believe so, I know with it in if it and it did go higher the car would roll.
Reply
Old Jan 17, 2006 | 05:34 PM
  #9  
dave5678's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2005
Posts: 73
Likes: 0
From: Germany
Cool will give it a shot. Cant wait for your turbos to get here!!!
Reply
Old Jan 17, 2006 | 06:25 PM
  #10  
dave5678's Avatar
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Nov 2005
Posts: 73
Likes: 0
From: Germany
Wouldnt let me edit my previous post, but I forgot to mention that makes sense about the fuse because in a supra it helps in two ways... the fix cantgostraight stated it does and it takes off the 155mph govenor on the supra.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
Oct 9, 2015 10:05 PM
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:47 AM.