Name that part:
09-15-06, 10:20 PM
#1
wants some ube
Thread Starter
Name that part:
This connector is located on the LIM:
When I pulled my motor (about 10 months ago) I broke a connector at some point, and I had no clue where it came from. I'm guessing this is it.
Edit: I really hate the red vac hoses. Stupid doing on my part.
When I pulled my motor (about 10 months ago) I broke a connector at some point, and I had no clue where it came from. I'm guessing this is it.
Edit: I really hate the red vac hoses. Stupid doing on my part.
09-16-06, 06:57 PM
#7
Rotary Enthusiast
iTrader: (5)
Join Date: Mar 2005
Location: Boxford, MA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
I don't know if you can get that separately from the valve, if you are ordering from Malloy, Ray will probably know what you are talking about. I'll take a look in the parts fiche.
EDIT - From the parts fiche it looks like you can't get that separately from the valve, and there are two options for the valve
N3A1-20-300 (Fed) - around $150
N3A3-20-300 (California) - around $220
Both options look pretty unattractive to me. Might as well just block it off and do away with EGR.
EDIT - From the parts fiche it looks like you can't get that separately from the valve, and there are two options for the valve
N3A1-20-300 (Fed) - around $150
N3A3-20-300 (California) - around $220
Both options look pretty unattractive to me. Might as well just block it off and do away with EGR.
Last edited by Maximum; 09-16-06 at 07:06 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
robperri
3rd Generation Specific (1993-2002)
4
10-21-10 09:30 PM