Looking for pics of controllers/gauges/units installed in the glovebox. Please post at will... TIA.

 

No one has pics?

 

I went through about 3,000 photos and couldn't find a single one of controllers/gauges/units installed in the glovebox of FD's.

I have some of other cars though. I believe S2K's.

 

The closest I can do is my EBC mounted just under the glove box ... I had originally intended putting it in the GB out of the way but I didn't like the kink in the hose so went for a lower mounting position. Other than that I don't think I've ever seen any gauges in the GB, guess it's too much of a pain to look at them quickly.

 

I know there are some of you guys that have stuff mounted in your glovebox... I know Carson does...

 

I've got a boost gauge in my glovebox, but it's not mounted securely. My car is mostly stock and I'd rather not cut the glovebox yet. Every now and then, I'll have my passenger check the gauge to make sure I'm seeing 10-8-10 in 3rd gear.

-s-

 

I have seen at a show an FD with a panel in the GB that held several gauges... No controllers though. I originally planned on hiding my controllers there for a bit of sleeper status, but no longer need to as my stereo is being removed completely so I will use that space. Plus, you can't really hide the PFC Commander and it's display..... Too useful

 

Hide the PFC Commander under the ashtray, I slide the cover open to see the display and lift tray out to push buttons. I modificed ashtray to just be the sliding top assembly, left enough edge in so that it still mounts nicely, and moded under tray to hold Commander.
All I have in my glovebox is a rally speed/distance computer wiring interface. ... What good is a gauge behind a glovebox door.

 

Well, I have a Profec Type-S that I'm trying to install and need a place to mount the control unit.

 

I have my Profec in the little compartment below the radio. Right now its just setting there, I need to put some sticky on it.

 

https://www.rx7club.com/showpost.php...57&postcount=1

 

I found a place to mount it... https://www.rx7club.com/3rd-generation-specific-1993-2002-16/installing-profec-type-s-556435/