Infini Y pipe kit?
#2
Senior Member
#7
Original Gangster/Rotary!
iTrader: (213)
Ari at www.rx7.com recently told me on a stock twin car running 15 psi they saw 10 rwhp increase on back to back runs.
I have thought about getting one, but I can't use the crossover piece b/c of my M2 intercooler, and the other section would have to be welded/extended to accomodate my larger CHRAs. Not sure if I want to blow 200 bucks to only use half of the kit, while mutilating the half that I do use. Of course, I plan to dyno at 20 psi, so at that level I suppose every bit helps......
I have thought about getting one, but I can't use the crossover piece b/c of my M2 intercooler, and the other section would have to be welded/extended to accomodate my larger CHRAs. Not sure if I want to blow 200 bucks to only use half of the kit, while mutilating the half that I do use. Of course, I plan to dyno at 20 psi, so at that level I suppose every bit helps......
Trending Topics
#8
Full Member
Join Date: Aug 2005
Location: Houston, TX
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
the efini Y pipe gives better flow of air to the turbo, because on the stock y pipe if you take it out and look in it you will notice that middle hose cost a restriction on the air flow. it's a piece of pipe metal sticking out slowing down flow between the turbo, whereas the efini y pipe have a straight flow with no obstruction
#9
Originally Posted by GoodfellaFD3S
Not sure if I want to blow 200 bucks to only use half of the kit, while mutilating the half that I do use. Of course, I plan to dyno at 20 psi, so at that level I suppose every bit helps......
Thread
Thread Starter
Forum
Replies
Last Post