3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

I Think I need a new engine... Help!

Thread Tools
 
Search this Thread
 
Old Dec 22, 2003 | 10:45 AM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 39
Likes: 0
From: Old Lyme Connecticut
Exclamation I Think I need a new engine... Help!

Hi everyone,

I have a 93' touring that I have been chasing a cooling problem for about 3 months. Coolant is being pushed out the resivior all the time. I have replaced the thermostat, water pump, radiator, Fan relays, Water pump thermo-switch. Nothing. Still does it. Fans are running. I think my O-rings are shot, I cant come up with anything else that could be it. Any help would be appriciated. If I need to get a new engine, any suggestions as to which place I should get it from? I'm located in CT.

Thanks,

Jason Dean
Reply
Old Dec 22, 2003 | 11:40 AM
  #2  
FormerPorscheGuy's Avatar
Yes it is for sale.
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 1,905
Likes: 1
From: The Houston Club's Resident Lush.
Do the champaign bubble test. If there are bubbles then your coolant seals are gone. If not then you may need to replace the preasure cap.
Reply
Old Dec 22, 2003 | 12:33 PM
  #3  
Slam Pig
Tenured Member 15 Years
 
Joined: Dec 2002
Posts: 888
Likes: 0
From: New York
pressure cap fixed me....jack one off someone elses car before you buy one.....the one of my mom moms acura worked just fine
Reply
Old Dec 23, 2003 | 08:50 AM
  #4  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 39
Likes: 0
From: Old Lyme Connecticut
champange bubble test?

What is the champange bubble test?
Reply
Old Dec 23, 2003 | 08:51 AM
  #5  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 39
Likes: 0
From: Old Lyme Connecticut
I replaced the capwhen I replaced the water pump already. I do smell a sweet smell in the exhaust.
Reply
Old Dec 23, 2003 | 08:52 AM
  #6  
Senior Member
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 290
Likes: 0
From: New York, NY
with the cooland pressure cap off... you see tiny little champagne like bubbles......
Reply
Old Dec 23, 2003 | 03:22 PM
  #7  
jpandes's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 2,236
Likes: 1
From: San Francisco, CA
Originally posted by nycrx7
with the cooland pressure cap off... you see tiny little champagne like bubbles......
the engine should be running when you do this.
Reply
Old Dec 23, 2003 | 08:41 PM
  #8  
impactwrench's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Dec 2002
Posts: 1,224
Likes: 2
From: Bonita Springs Fl
pettit racing.............changed out mine in june. stop messin with testin. you've been readin the forum. i too, hoped that my cooling problems were some quik fix thing, but we all know better. start pullin it and get it over with
Reply
Old Dec 23, 2003 | 09:06 PM
  #9  
Full Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 165
Likes: 0
From: in your rearveiw mirror about to pass you!
I have the same problem(o-ring failure) I'm going to have Atkins Rotary here in WA state build my dream engine. They sell videos on removing the engine and getting it running. Do the labor yourself save the money for upgrades. Good luck!
Reply
Old Dec 23, 2003 | 09:18 PM
  #10  
DaedelGT's Avatar
Uber Newb.
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 98
Likes: 0
From: LSU - Baton Rouge, Louisiana
impactwrench, that's not helping at all.
Reply
Old Dec 24, 2003 | 10:02 AM
  #11  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 39
Likes: 0
From: Old Lyme Connecticut
ok I guess i will just order a new engine and swap it out, wont be very difficult I think. thanks guys.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chiaszy
New Member RX-7 Technical
5
Sep 23, 2015 01:43 PM
Enthu
3rd Generation Specific (1993-2002)
18
Oct 6, 2003 10:56 AM
Gregs
1st Generation Specific (1979-1985)
36
Sep 28, 2003 07:05 PM
WanKeL FD RX-7
1st Generation Specific (1979-1985)
3
Sep 9, 2003 07:49 PM
HoNdA KiLLeR 212
2nd Generation Specific (1986-1992)
1
Sep 6, 2003 11:57 PM




All times are GMT -5. The time now is 11:28 PM.