importadrenelin

most idiotic question ever asked... searched for it and nothing.. how much oil do you put in the FD?

nmo93

I use 4 1/2 quarts. Nick

Mahjik

iTrader: (1)

From the '93 manual:

Dry engine: 5.2qt Non R1, 5.7qt R1

Replacement Oil: 3.7qt
Replacement Oil with oil filter: 3.9qt

Scrub

iTrader: (25)

That oil cooler keeps a lot of old oil in it.

93 R1

4 qts unless you drain the oil coolers...on my car.

vudoodoodoo

Look in the driver's manual. It's in the back under CAPACITIES. On my R1, it's 3.9 quarts including the filter. I just pour in 4 quarts.

Hmm.. I should drain the oil coolers next time. I didn't know they hold that much old oil.

SanJoRX7

Anything more than 4 quarts is asking for trouble. If you've got any couplings that are loose, you'll see oil there if you overfill. I once overfilled (about 4.5 qts) and I had a bad coupler on the stock Y-pipe. The oil would leak out and start to burn on the pipe, which scared me since there was smoke coming from under the hood.

There is some evidence to believe that overfilling can be injurious to the motor in some way, but I honestly don't know the details or whether or not they're true.

I'd say 3.5 qts while it's up on stands, lower the car, wait a few mins, check the dipstick and add oil until it's just at the top of the hash marks.

RX7Elmo

Is there a way to get a bigger oil filter than the stock small one!?!? I mean, i can understand if the oil we filled it up wtih was only 3qt, but it's not. Can we use a bigger filter int he stock location?

And yes, the oil coolers hold a lot of oil, especially if you have an R1