I can't seem to find anywhere instructions for how to bolt up this rollbar. I understand the general area where it bolts up, but I don't kow the exact points. If anyone can shed some light/post some pictures that would be great. THanks!

-Mimke

 

I don't think the directions will tell you "exactly where to mount it. You'll need to fit it up yourself. Just make sure all panels are seperated equally etc. etc. etc.

 

Eric,
that's kind of what I figured. I've basically just been too lazy with the project and probably won't put it in for a while seeing as the car won't br running. How's your beast holding up?

-Mike

 

Well, my transmission just exploded on tuesday . Other than that, all is well

 

What trans do you have in it? Sucks

 

Stock

 

Of course you do, everything is strock isn't it?

 

bump for anyone that has pictures

 

When I bought my car 5+ years ago it had an Autopower rollbar installed. It limited visibility and the car wasn't making power much over stock so I promptly removed and sold it. But from what I recall it bolted to the floorboard behind the seats and through the rear speaker holes (which is probably obvious to you). The passenger seat couldn't be moved back to its furthest position the way it was installed. I could snap some pics of the bolt hole locations if it would help.

-Scott

 

Scott,

That would be perfect if you could. That's exactly what I'm looking for! Thanks!

-Mike

 

Pics here: http://www.surkiah.com/rx7/pics/rollbar/1.jpg

1.jpg - 6.jpg