Hood Struts for CF hoods?
#1
Hood Struts for CF hoods?
OK everyone, I've "searched" and read nearly every Gen 3 thread on this topic. I know that Chuck at Rotary Extreme (RE) offered probably the best solution at one time, but my question is this:
"Is anyone aware of a current solution on the market that works without valving so stiff that it bows CF hoods when closing?"
I've personally witnessed how stiff the NRGs are, and the Teins are not much better. Are there any "Ebay" solutions that have softer valving, but still do a good job of holding up the hood? What has your experience been? Is anyone aware of a "stock OEM" strut, such as a short one from Honda that might work? Have you found a strut at Checker or Autozone that might work?
Please share your experience!
Thx!
"Is anyone aware of a current solution on the market that works without valving so stiff that it bows CF hoods when closing?"
I've personally witnessed how stiff the NRGs are, and the Teins are not much better. Are there any "Ebay" solutions that have softer valving, but still do a good job of holding up the hood? What has your experience been? Is anyone aware of a "stock OEM" strut, such as a short one from Honda that might work? Have you found a strut at Checker or Autozone that might work?
Please share your experience!
Thx!
#4
Thanks for the responses guys. I just Googled "NRG Struts Carbon Fiber Hoods" and found a link to a Scion website that claims you can special order them from NRG at half-pressure specifically for carbon fiber hoods. I've got a dealer checking into this and will get back to everyone with an answer tomorrow.
#6
Searching for 10th's
iTrader: (11)
OK everyone, I've "searched" and read nearly every Gen 3 thread on this topic. I know that Chuck at Rotary Extreme (RE) offered probably the best solution at one time, but my question is this:
"Is anyone aware of a current solution on the market that works without valving so stiff that it bows CF hoods when closing?"
I've personally witnessed how stiff the NRGs are, and the Teins are not much better. Are there any "Ebay" solutions that have softer valving, but still do a good job of holding up the hood? What has your experience been? Is anyone aware of a "stock OEM" strut, such as a short one from Honda that might work? Have you found a strut at Checker or Autozone that might work?
Please share your experience!
Thx!
"Is anyone aware of a current solution on the market that works without valving so stiff that it bows CF hoods when closing?"
I've personally witnessed how stiff the NRGs are, and the Teins are not much better. Are there any "Ebay" solutions that have softer valving, but still do a good job of holding up the hood? What has your experience been? Is anyone aware of a "stock OEM" strut, such as a short one from Honda that might work? Have you found a strut at Checker or Autozone that might work?
Please share your experience!
Thx!
RE Hood Dampers
I have the dampers I purchased from them a couple years ago, and no bowing visible on my VIS CF hood.
Trending Topics
#10
Kai and Riz..... agreed and thanks for the replies. However, they are no longer for sale. If I can't get half-strength NRGs, I may just go to Checker and find some of similar length and make my own kit. We'll see.
Riz... did you get my PM asking if your extra set of REs was still for sale? I never got a reply, so I assume that you've sold them??
Riz... did you get my PM asking if your extra set of REs was still for sale? I never got a reply, so I assume that you've sold them??
#14
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
Kai and Riz..... agreed and thanks for the replies. However, they are no longer for sale. If I can't get half-strength NRGs, I may just go to Checker and find some of similar length and make my own kit. We'll see.
Riz... did you get my PM asking if your extra set of REs was still for sale? I never got a reply, so I assume that you've sold them??
Riz... did you get my PM asking if your extra set of REs was still for sale? I never got a reply, so I assume that you've sold them??
PM'd you back! Sorry for the late reply. Yes, unfortunately I sold them awhile back. You should try the F/S section. You might just get lucky...
#15
Super Moderator
iTrader: (148)
Rotary Extreme
OP,
Rotary Extreme is back in business (different owner but same products) and you can get the dampers...
http://www.rotaryextreme.com/fdindex.html
I have talked to the owner about these and he stated that he places orders once he receives an order and it takes about three weeks for the product to get to you.
Charlie
Rotary Extreme is back in business (different owner but same products) and you can get the dampers...
http://www.rotaryextreme.com/fdindex.html
I have talked to the owner about these and he stated that he places orders once he receives an order and it takes about three weeks for the product to get to you.
Charlie
#17
Eats, Sleeps, Dreams Rotary
iTrader: (2)
Hey guys, Yes I still sell everything that Chuck made. Sorry I am on a made per oder set-up, but that's the only way to bring the business back at this time.
When payment is made for anything, I have to get the cnc guy to make the custom pieces and order any other parts. That takes time to get the kits together. Then there is shipping.
I don't carry any stock. Economy does not support me to also.
Ben
When payment is made for anything, I have to get the cnc guy to make the custom pieces and order any other parts. That takes time to get the kits together. Then there is shipping.
I don't carry any stock. Economy does not support me to also.
Ben
#20
needs more track time
iTrader: (16)
IIRC, back then Chuck specified two different hood shocks. A higher compression rated shock for the heavier stock hood and a lower compression for the fiberglass or carbon hoods. The mounting hardware was the same. The shocks themselves are off the shelf parts from a manufacturer that makes those products.
Search for his original posts on the subject.
Search for his original posts on the subject.
#24
AponOUT!?
iTrader: (31)
OP,
Rotary Extreme is back in business (different owner but same products) and you can get the dampers...
http://www.rotaryextreme.com/fdindex.html
I have talked to the owner about these and he stated that he places orders once he receives an order and it takes about three weeks for the product to get to you.
Charlie
Rotary Extreme is back in business (different owner but same products) and you can get the dampers...
http://www.rotaryextreme.com/fdindex.html
I have talked to the owner about these and he stated that he places orders once he receives an order and it takes about three weeks for the product to get to you.
Charlie
works great for me
#25
MMR SpeedFactory
iTrader: (17)
Join Date: May 2008
Location: Montreal, Canada
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
i feel like the force in the dampers might be too strong, since the weight difference between a Cf hood and a Regular OEM hood differs, so the damping force should be different as well. I know the CNC brackets helps reduce that type of damage, but NRG makes specific half force dampers specially for aftermarket CF hoods, i know that Ramy had started a GB on that subject but hes dissapeared for god knows how long. So im contemplating on what to do...any other options?