3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Havin a little prob...

Thread Tools
 
Search this Thread
 
Old Oct 21, 2004 | 09:19 AM
  #1  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
Havin a little prob...

Hey guys just got a ? here...WHen im driving and its ususally after i just started it, im driving in like 2nd gear or 3rd and i either put it in neutral or put it in first gear and well my rpm's drop all of a sudden sometimes and it wants to die but then goes back up. so i dont know if this is normal or whats cuasing this...and one more question the tranny fluild in my car is 75W-90 but i wanted to know what type of synthetic oil to put into it like what brand and etc....thanks guys!
Reply
Old Oct 21, 2004 | 09:49 AM
  #2  
95R2-89TII Ground Zero's Avatar
Banned
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 2,519
Likes: 2
From: Rochester, MI
BAC? That's what it sounds like.
Reply
Old Oct 21, 2004 | 10:24 AM
  #3  
moehler's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (12)
 
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
mods??
Reply
Old Oct 21, 2004 | 10:49 AM
  #4  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
sorry but what is BAC? and my mods are APexi power intake, downpipe, act street strip clutch, greddy turbo timer, apexi power fc with commander, apexi n1 catback exhuast...

p.s. car has 37,050 miles on it....
Reply
Old Oct 21, 2004 | 10:59 AM
  #5  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
has it always been doing this? it is starting to get colder out so i would think it is a temp/fuel correction setting. it only does it when it is cold after the car warms up it is ok? or the air bleed may need to be adjusted a bit
Reply
Old Oct 21, 2004 | 11:12 AM
  #6  
ROTARYFDTT's Avatar
Ding King
Tenured Member 20 Years
iTrader: (4)
 
Joined: Jan 2002
Posts: 1,289
Likes: 1
From: Rochester Hills, MI
It could be your idle adjustment screw right next to the throttle cable (I can't recall the proper name), if it’s backed out to the point where it isn't snug. Symptoms similar to those you described can occur. If this is the case, it should get progressively worse.
Reply
Old Oct 21, 2004 | 11:22 AM
  #7  
dubulup's Avatar
development
Tenured Member 15 Years
 
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
https://www.rx7club.com/3rd-gen-archives-73/weird-idle-fluctuations-when-1st-gear-305989/
Reply
Old Oct 21, 2004 | 12:55 PM
  #8  
moehler's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (12)
 
Joined: Mar 2003
Posts: 2,319
Likes: 32
From: South Jersey
Try this:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/car-stalling-during-warm-up-any-ideas-320217/
Reply
Old Oct 21, 2004 | 02:33 PM
  #9  
FastCat17's Avatar
Thread Starter
Full Member
Tenured Member 15 Years
 
Joined: Sep 2003
Posts: 242
Likes: 0
From: La Junta, Colorado
Yes it is starting to get colder outside now and its only when the car is cold to warming up..it has never acted up when the car is warmed up.
Reply
Old Oct 21, 2004 | 08:42 PM
  #10  
turbodrx7's Avatar
PURIST
Tenured Member 15 Years
iTrader: (43)
 
Joined: Feb 2004
Posts: 3,167
Likes: 3
From: Bel Air, MD
mine did the same thing when i did my motor. It would only do it if the air was off. KD said it was the BAC but it went away or i just always left the air on.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TalkSick
2nd Generation Specific (1986-1992)
10
Dec 27, 2005 02:47 PM
mashing rx7
2nd Generation Specific (1986-1992)
1
Jul 27, 2005 06:12 PM
BklynRX7
2nd Generation Specific (1986-1992)
3
May 29, 2005 12:24 PM
rx7rotary89
2nd Generation Specific (1986-1992)
10
Jun 26, 2003 12:15 AM




All times are GMT -5. The time now is 04:33 AM.