3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

hard brake the car turn right

Thread Tools
 
Search this Thread
 
Old Aug 30, 2009 | 03:06 PM
  #1  
pietrino's Avatar
Thread Starter
Italian Rider
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Sep 2001
Posts: 407
Likes: 10
From: Italy; EUROPE
hard brake the car turn right

as by title when i make an hard brake the car turn right
I checked wheel allinement and tire pressure.
Any help?
Reply
Old Aug 30, 2009 | 03:33 PM
  #2  
staticguitar313's Avatar
R.I.P. Icemark
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Sep 2004
Posts: 4,229
Likes: 1
From: gilbert, arizona
Take your wheel off and inspect your brakes. Check both fronts.
Reply
Old Aug 30, 2009 | 06:21 PM
  #3  
pietrino's Avatar
Thread Starter
Italian Rider
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Sep 2001
Posts: 407
Likes: 10
From: Italy; EUROPE
did, replaced all ring, rubber, even brake pad. But still have this problem
Reply
Old Aug 30, 2009 | 06:21 PM
  #4  
oppa637's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,247
Likes: 6
From: Houston
i'd rebleed.
Reply
Old Aug 30, 2009 | 06:22 PM
  #5  
oppa637's Avatar
Rotary Enthusiast
Tenured Member: 15 Years
iTrader: (6)
 
Joined: Feb 2009
Posts: 1,247
Likes: 6
From: Houston
oh, and check the rear left caliper and cable
Reply
Old Aug 30, 2009 | 06:23 PM
  #6  
pietrino's Avatar
Thread Starter
Italian Rider
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Sep 2001
Posts: 407
Likes: 10
From: Italy; EUROPE
sorry, what mean rebleed?
Reply
Old Aug 30, 2009 | 06:28 PM
  #7  
apexhittinbull's Avatar
Senior Member
Tenured Member: 20 Years
Liked
iTrader: (21)
 
Joined: Jan 2003
Posts: 739
Likes: 8
From: Los Angeles
bleed again = re-bleed

check your rear brakes as well. If your right rear slightly locks or biased toward, you will yaw to the right. or by same token, if your left rear doesn't brake sufficiently relative to your rear right one, it will do the same.
Reply
Old Aug 31, 2009 | 07:18 PM
  #8  
pietrino's Avatar
Thread Starter
Italian Rider
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Sep 2001
Posts: 407
Likes: 10
From: Italy; EUROPE
For bleed you mean changhe the fluid and with new fluid in pressure clean all the hose?
I will do it again.
I want also to check if it make some difference accelerating. beacuse could be also some arb or bushing.
Few month agò i replaced the Upper Control Arm Outer Bearing,Lower Control Arm Outer Bearing and Lower Control Arm Middle Bearing. but wasnt changed. using today the car i notice that the car dosent go straight but tends to follow the road imperfection. This little problem comed out when i mounted the 18" wheel (the problem of the brake and right turn was also before). Could be some problem in some arm? how to check it?
2 mecchanic said the car is ok. one found the bushing usured.
Suggestions?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 10:24 AM.