Gramotoring
#1
Junior Member
Thread Starter
Gramotoring
Any experience with this shop?
https://gramotoring.com/products/maz...-o-center-deck
I am looking to put in a 99spec upright / mazdaspeed wing on my FD
https://gramotoring.com/products/maz...-o-center-deck
I am looking to put in a 99spec upright / mazdaspeed wing on my FD
#2
Rotary Enthusiast
iTrader: (5)
carbon fiber hood
I ordered a hood from them. Wait time is the key here. I didnt mind the wait time.
The hood has good fitment as with many hoods is hard to get fitment perfect, but i am ok with it.
The communication is very good, at least in my experience they always replyed withing 2 days if not they called me the same day. The hood was very well packed.
If you don't mind the wait, I would try them out.
The hood has good fitment as with many hoods is hard to get fitment perfect, but i am ok with it.
The communication is very good, at least in my experience they always replyed withing 2 days if not they called me the same day. The hood was very well packed.
If you don't mind the wait, I would try them out.
Last edited by Red94fd; 05-17-22 at 09:22 PM. Reason: spelling
The following users liked this post:
estevan62274 (05-18-22)
#6
Built Not Bought
iTrader: (14)
Yeah, I had a good experience with GTC front bumper. Any decent made to order body panel place is going to have a backlog and take a few months. This place had good communication whenever I needed it and there was damage during shipping due to a forklift driver shoving the forks through the box and destroying the bumper. I sent pictures when the box arrived and they made another for me right away, no questions asked. Was unfortunate but they did what a good customer focused company should do and I would order again because of it.
Trending Topics
#13
Rotary Enthusiast
iTrader: (5)
My front bumper hans lower and i have to get around to fix it.
You can see the gap between my bumper and head lights.
The only gap that is a bit bigger is the gap behind the passanger head light cover. I can tell you that with the stock front bumper and with the bumper's support it will fit very well.
You can see the gap between my bumper and head lights.
The only gap that is a bit bigger is the gap behind the passanger head light cover. I can tell you that with the stock front bumper and with the bumper's support it will fit very well.
The following users liked this post:
RapidCancel (05-26-22)
Thread
Thread Starter
Forum
Replies
Last Post
BrianK
3rd Generation Specific (1993-2002)
54
06-27-03 10:04 AM