girl7 will an aftermarket cat and downpipe mess up the car?
#1
Hottie
Thread Starter
Join Date: Sep 2001
Location: Outer Space
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
girl7 will an aftermarket cat and downpipe mess up the car?
So I'm thinking about going with the Bšnez Performance Full Cat Replacement Kit.
Would this require ant other modification to keep the boost or fuel ok?
http://www.rx7.com/cgi-local/3catalog.cgi?cat=4&part=1
Would this require ant other modification to keep the boost or fuel ok?
http://www.rx7.com/cgi-local/3catalog.cgi?cat=4&part=1
#2
Rotary Enthusiast
Do you have the stock intake airbox, and IC? If so, then the sock ECU will hold up. If you opened up the intake then you are sitting at the boarder line of ECU upgrade, add an IC then definitely.
It really depends on what you currently have on your 7.
It really depends on what you currently have on your 7.
#3
Adrenaline
Join Date: Feb 2001
Location: Long Island, NY
Posts: 1,261
Likes: 0
Received 0 Likes
on
0 Posts
Getting these types of mods are great for the FD. It will let the car breathe better, less restrictive, and the temp for the car will drop. Also, if you have some boost problems this might solve your problem. If your car is stock right now you will not have any problems with the boost and fuel.
Also, you do not need an ic if you are running less than 12.5 psi.
Also, you do not need an ic if you are running less than 12.5 psi.
#4
Hottie
Thread Starter
Join Date: Sep 2001
Location: Outer Space
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys.
Sorry I should have said that the car is stock.
I had hoped to keep it as such but if I need a new cat there is no way I'm paying $1500 for a Mazda part. The precat is $1300 by the way.
Just trying to prepare for the possibilites.
Sorry I should have said that the car is stock.
I had hoped to keep it as such but if I need a new cat there is no way I'm paying $1500 for a Mazda part. The precat is $1300 by the way.
Just trying to prepare for the possibilites.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
LunchboxCritter
2nd Generation Specific (1986-1992)
15
01-03-16 04:11 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM