3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Felt like clutch was slipping..but Ran it Hard and now it doesn't !!

Thread Tools
 
Search this Thread
 
Old 02-01-02, 03:08 PM
  #1  
Pimpin Rotors...and Hoes

Thread Starter
 
badass7's Avatar
 
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes on 0 Posts
Question Felt like clutch was slipping..but Ran it Hard and now it doesn't !!

My clutch felt like it was slipping the other day as evident of high RPM's at low speed. I know the feeling bec. it felt like that 2yrs. ago when it went out on me last. However, now it bites hard as it has ever. I ran it hard for about 2 hrs. today and couldn't get it to slip. Someone told me my Clutch slave or something may have been sticking. Is that possible???
Old 02-01-02, 03:20 PM
  #2  
Will Work for Ferrari

 
mightyslash's Avatar
 
Join Date: Oct 2001
Location: West Coast
Posts: 582
Likes: 0
Received 0 Likes on 0 Posts
It might not happen everyday. Two weeks ago my clutched slipped, then it stopped slipping for a week or so. Now it slips.
Old 02-01-02, 03:28 PM
  #3  
Lives on the Forum

 
DamonB's Avatar
 
Join Date: Feb 2001
Location: Dallas
Posts: 9,617
Likes: 0
Received 8 Likes on 7 Posts
Remember the clutch will always slip in high gears first because the clutch than has less mechanical advantage between it and the diff. Put it in fourth and nail it through 4500 rpm.
Old 02-01-02, 03:34 PM
  #4  
Tequila? ..it's like beer

iTrader: (1)
 
NewbernD's Avatar
 
Join Date: Mar 2001
Location: Woodbine, MD
Posts: 1,124
Likes: 0
Received 0 Likes on 0 Posts
Not to mention that it'll slip a hell of a lot easier when it's hot.. No more do-nuts 'till you get a new one..
Old 02-01-02, 03:36 PM
  #5  
Pimpin Rotors...and Hoes

Thread Starter
 
badass7's Avatar
 
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by DamonB
Remember the clutch will always slip in high gears first because the clutch than has less mechanical advantage between it and the diff. Put it in fourth and nail it through 4500 rpm.
I did that and it pulled like a ***** w/out slipping. I think I will run this clutch til it completely wears out. We'll see if the slipping comes back. I have to take an 3 hour road trip tomm. and we'll see how it acts at the end of the trip. If it's slipping....I'm gonna go with the RPS Max Performance clutch kit.
Old 02-01-02, 03:38 PM
  #6  
Pimpin Rotors...and Hoes

Thread Starter
 
badass7's Avatar
 
Join Date: Feb 2001
Location: New Orleans, LA
Posts: 1,401
Likes: 0
Received 0 Likes on 0 Posts
As long as I've had this clutch I've only spun the tires twice !! NEVER have I dogged it. However, I do hard runs to redline on a daily basis. I guess it's catching up to me now.
Old 02-01-02, 04:41 PM
  #7  
Rotary Freak

 
2FAST7S's Avatar
 
Join Date: Oct 2001
Location: Carmel, NY
Posts: 1,886
Likes: 0
Received 0 Likes on 0 Posts
as long as were on the subject. A long time ago, I got into a bit of tight spot(18 wheeler didnt see me) and as a desperate attempt at not mangling my FD i down shifted into 3rd and floored it. To my surprise, I smoked the clutch so bad that I was smelling it miles down the road(not to mention the cloud of smoke i left back there. It slipped BAD but I managed to pull it off.
The clutch has not done that again. Any ideas as to what that was? It seem fine this summer when i kinda drove it hard.
Old 02-01-02, 05:04 PM
  #8  
Senior Member

 
turborotarypower's Avatar
 
Join Date: Feb 2001
Location: south jersey
Posts: 430
Likes: 0
Received 1 Like on 1 Post
actually i have a similar problem,but only when it's cold it will slip! when the clutch gets hot it won't slip!
Old 02-01-02, 06:27 PM
  #9  
Senior Member

 
rxshun7's Avatar
 
Join Date: Feb 2001
Location: CA
Posts: 368
Likes: 0
Received 1 Like on 1 Post
I have the exact same symptoms as you badass. I was experiencing slipping about a week ago in 4th and 5th gears. However, when I try to intentionally slip the clutch now, it doesn't. Please post the solution to the problem if you find it. It's most likely the same solution that i'm looking for. thanks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
Clubuser
General Rotary Tech Support
11
08-31-15 12:25 PM



Quick Reply: Felt like clutch was slipping..but Ran it Hard and now it doesn't !!



All times are GMT -5. The time now is 12:53 PM.