rotarypower101

iTrader: (1)

Does anyone have pictures of the headlight housing alignment pins that key into the superstructure?

I am mostly concerned about what the original nuts and “alignment pegs” look like, I don't know if mine have been modified or something strange, but they have never looked correct, and I would like to correct this little detail if possible.

Any detailed pictures of the hardware individually pictured,mounted, anything that would help get a feel for what they looked like as shipped stock OEM condition please.

Right now I have flanged nuts on there that barely catch a thread or two, and it bothers me that they don't look correct, and I have not been able to find a detailed picture of what I am looking for.

Thank you in advance for facilitating such a silly request.

rotarypower101

iTrader: (1)

Its quite silly, but the length of the alignment pins that plug into the unibody superstructure are/seem too short, and I would like to see what the original factory supplied hardware looks like so that I may more closely match it.

cr-rex

iTrader: (114)

those nuts arent attached to the car. those are part of the headlight assy. they dont do anything. i have no idea what thay are there for.

jutFD

iTrader: (2)

I just have regular 10mm nuts on mine, not flange nuts. I'll try to remember to post a pic after work

rlee429

iTrader: (25)

Those look like the screws used to fasten the headlight covers to the bucket.

jutFD

iTrader: (2)

jutFD

iTrader: (2)

pile of ****. dont know why 1st didnt work.....here ya go

rotarypower101

iTrader: (1)

Thank you!
So they are just thin 6mm nuts then...

Will see if I can either find some appropriate SS ones or just order them.

jutFD

iTrader: (2)

You're welcome. Mine are actually 10mm