the cym project begins!!!
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
the cym project begins!!!
alrite fellas
as you all know (maybe) i purchased a cym with no engine or trans
well i finally decided that its time to get this thing started
heres wut i have so far
has engine trans and a good amount of aftermarket pieces
its RHD an was wondering if the harness can be used on usd cars?????
but i will eventually get a new harness frrom the dealership i work at
i would like everyone to take part in this, if you like and help a brotha out
i have never pulled a motor or trans but its worth a shot and theres no better
time than now
heres the car if u guys dont remember
thanx in advance
mike
as you all know (maybe) i purchased a cym with no engine or trans
well i finally decided that its time to get this thing started
heres wut i have so far
has engine trans and a good amount of aftermarket pieces
its RHD an was wondering if the harness can be used on usd cars?????
but i will eventually get a new harness frrom the dealership i work at
i would like everyone to take part in this, if you like and help a brotha out
i have never pulled a motor or trans but its worth a shot and theres no better
time than now
heres the car if u guys dont remember
thanx in advance
mike
Last edited by rotoboy661; 10-19-04 at 09:10 AM.
#4
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by allrotor93
sunroof in an r model?
its all goin to be removed and replaced with an r1 top skin
Trending Topics
#11
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastcarfreak
have you actually confirmed that this is a real CYM model, or is it just painted cym?
adam
adam
#12
Holy ****, your car is doing a wheelie without even moving!
The fact that you have to get a new harness is actually a good thing. With it being new and installed by yourself, you will know everything is in perfect condition and working. Looks like a pretty fun project.
The fact that you have to get a new harness is actually a good thing. With it being new and installed by yourself, you will know everything is in perfect condition and working. Looks like a pretty fun project.
#13
Do it right, do it once
iTrader: (30)
You can tell from the engine compartment paint that it is a real CYM. The factory only "fogs" on the paint on the side of the frame rails, etc. So if it were a different color originally and repainted it CYM you'd see the original color underneath the "fogged" CYM.
Otherwise if it were a repaint the engine compartment would be glossy.
That is a nice looking car, too bad about the sunroof but that shouldn't be too hard to fix. Good luck on it!
I wish my CYM was as put together as yours.
Otherwise if it were a repaint the engine compartment would be glossy.
That is a nice looking car, too bad about the sunroof but that shouldn't be too hard to fix. Good luck on it!
I wish my CYM was as put together as yours.
#15
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
aiite fellas got more work done today
at about 3pm the clip came along with some goodies
i started work to get the motor pulled out before it starts pouring again
after 3hrs of work its out and ready for inspection
heres some pics
thats mee
at about 3pm the clip came along with some goodies
i started work to get the motor pulled out before it starts pouring again
after 3hrs of work its out and ready for inspection
heres some pics
thats mee
#16
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
more to come stay tuned lol (always wanted to say that)
should i do a vac job while the motor is out???
anything i should check for???
thanx again fellas
mike
should i do a vac job while the motor is out???
anything i should check for???
thanx again fellas
mike
#19
TRINGLS
Join Date: Apr 2004
Location: Clermont, FL
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
Your neighbors must hate you. lol
Thats awesome man, glad to see another CYM coming together... if I ever have the chance to own another FD I want it to be a CYM.
~Kris
Thats awesome man, glad to see another CYM coming together... if I ever have the chance to own another FD I want it to be a CYM.
~Kris
#22
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by johgar
Wow, you pulled the engine on the sidewalk?
nah my neigbors are koo they even asked "what the hell is that??" or "another
one??
gonna sell some of the goodies from the clip so keep a look out on the forsale section
heres wut came with it
thrust fmic
feed radiator
re amemiya intake
full rear end
full front end
subframe
steering rack for RHD
various misc. parts for RHD conversion
and a blitz sus CB
let me know if u guys are interested in any of those
thanx
mike