CoolingMist Water Injection Installed.
#76
Will u do me a kindness?
iTrader: (2)
Originally Posted by kabooski
hmm ok so with it on you lower you A/F's
Then well
it makes sence to make 'more' power...... when you use the Kit
either run more timing when it turns on
or lean it out when it activates
since you should be able to run a bit more timming advance
and still be safe when its on
maybe thats been covered
(came upon this thread using the "search"..hehe)
Then well
it makes sence to make 'more' power...... when you use the Kit
either run more timing when it turns on
or lean it out when it activates
since you should be able to run a bit more timming advance
and still be safe when its on
maybe thats been covered
(came upon this thread using the "search"..hehe)
Last edited by the_glass_man; 06-09-05 at 09:49 PM.
#77
3rd motors a charm I hope
Join Date: Apr 2003
Location: Central New York
Posts: 2,054
Likes: 0
Received 0 Likes
on
0 Posts
I think it is best used as a safety mod. I think our motors need all the extra safety it can get. When i get my microtech in, i will be running water injection and a mixture of toluene to make sure i dont blow up again. If I use high boost, I will be running race fuel and water injection. If I blow motor with this setup, I will be making the dreaded "swap". It will be bye bye rotary, and hello LS1. But, im hoping it doesnt have to come to that for a couple years or so.
Adam
Adam
#78
Will u do me a kindness?
iTrader: (2)
Originally Posted by fastcarfreak
I think it is best used as a safety mod. I think our motors need all the extra safety it can get. When i get my microtech in, i will be running water injection and a mixture of toluene to make sure i dont blow up again. If I use high boost, I will be running race fuel and water injection. If I blow motor with this setup, I will be making the dreaded "swap". It will be bye bye rotary, and hello LS1. But, im hoping it doesnt have to come to that for a couple years or so.
Adam
Adam
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM