clutch pedal drops when pushed slowly
10-08-15, 04:56 PM
#1
imitek
Thread Starter
clutch pedal drops when pushed slowly
This car is starting to get on my **** now lol
its new problem whwn i press clutch pedal slowley it dropes down but lift it and re press and its ok no leaks that i can see but its been sat for 3 weeks waiting on manifold to be welded anyway
When i press hard the pedal seems fine been like tgis for 3 days ive not attempted to sort it yet just thort id ask first if any 1 has had anything like this Im guessing its the pedal cylinder the way it feels
Thanks all
its new problem whwn i press clutch pedal slowley it dropes down but lift it and re press and its ok no leaks that i can see but its been sat for 3 weeks waiting on manifold to be welded anyway
When i press hard the pedal seems fine been like tgis for 3 days ive not attempted to sort it yet just thort id ask first if any 1 has had anything like this Im guessing its the pedal cylinder the way it feels
Thanks all
10-08-15, 05:30 PM
#2
RX-7 Bad Ass
iTrader: (55)
It's either the master cylinder or the slave cylinder. If one is going out, the other isn't far behind.
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
10-08-15, 06:01 PM
#3
imitek
Thread Starter
It's either the master cylinder or the slave cylinder. If one is going out, the other isn't far behind.
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
Thank you for your help will get set orderd weekend most helpfull advice
Thanks loads
10-09-15, 10:14 AM
#6
imitek
Thread Starter
Trending Topics
10-16-15, 12:05 PM
#8
imitek
Thread Starter
So finlay have found it thort id try the master as you guys have said so took some pics and its not realy leaking but its wet i wss trying to get it to leak was goin crazy at peddle for few min seems like when u go slowly down u can hear air bubbles at master
Must have been like this for while as feels like clutch travel is less now
So replaced and bleed it up and she is a gooden thanks very much for evryones assistance
Must have been like this for while as feels like clutch travel is less now
So replaced and bleed it up and she is a gooden thanks very much for evryones assistance
11-03-15, 06:59 PM
#10
It's either the master cylinder or the slave cylinder. If one is going out, the other isn't far behind.
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
Get a NEW master and slave cylinder, not a rebuilt cheapie from the parts store. You can get good ones from j-auto.net
I would also go ahead and replace the stock rubber clutch hose with braided stainless. Banzai Racing has a nice one, or you may be able to source one locally.
Dale
I also sell SS braided clutch lines through my website to make it easier on everyone to get parts from one source 
Thread
Thread Starter
Forum
Replies
Last Post
musker
2nd Generation Specific (1986-1992)
28
12-03-15 11:18 AM
Interpol
2nd Generation Specific (1986-1992)
1
10-08-15 08:39 AM